Except for RTL_VER_01, replace loading the MAC address from PLA_IDR with from PLA_BACKUP. The default MAC address may be modified by the other OS, so the PLA_IDR may be not the default MAC address.
The data in the PLA_BACKUP address of the RTL_VER_01 may be destoryed, so load MAC address from PLA_IDR for RTL_VER_01. Signed-off-by: Hayes Wang <hayesw...@realtek.com> --- drivers/net/usb/r8152.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 4888e4f..3847c35 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -889,11 +889,26 @@ int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags); static inline void set_ethernet_addr(struct r8152 *tp) { struct net_device *dev = tp->netdev; + int ret; u8 node_id[8] = {0}; - if (pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id) < 0) + if (tp->version == RTL_VER_01) + ret = pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id); + else + ret = pla_ocp_read(tp, PLA_BACKUP, sizeof(node_id), node_id); + + if (ret < 0) { netif_notice(tp, probe, dev, "inet addr fail\n"); - else { + } else { + if (tp->version != RTL_VER_01) { + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, + CRWECR_CONFIG); + pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, + sizeof(node_id), node_id); + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, + CRWECR_NORAML); + } + memcpy(dev->dev_addr, node_id, dev->addr_len); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); } -- 1.8.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/