On Sun, Feb 23, 2014 at 2:12 AM, Mark Brown <[email protected]> wrote: > On Thu, Feb 20, 2014 at 05:36:02PM +0100, Markus Pargmann wrote: >> Hi, >> >> These two patches replace all ops->enable/disable by >> _regulator_do_disable/enable function calls. These wrappers also handle gpio >> regulators. > > Applied both, thanks.
With these two patches applied I get the following error on mx6qsabresd running today's linux-next: vdd1p1: failed to enable anatop_regulator regulator-1p1.2: failed to register vdd1p1 anatop_regulator: probe of regulator-1p1.2 failed with error -22 vdd3p0: failed to enable anatop_regulator regulator-3p0.3: failed to register vdd3p0 anatop_regulator: probe of regulator-3p0.3 failed with error -22 vdd2p5: failed to enable anatop_regulator regulator-2p5.4: failed to register vdd2p5 anatop_regulator: probe of regulator-2p5.4 failed with error -22 vddarm: 725 <--> 1450 mV at 1100 mV vddpu: 725 <--> 1450 mV at 1100 mV vddsoc: 725 <--> 1450 mV at 1175 mV .... pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 0 pfuze100-regulator 1-0008: FAB: 0, FIN: 0 SW1AB: failed to enable pfuze100-regulator 1-0008: register regulatorSW1AB failed pfuze100-regulator: probe of 1-0008 failed with error -22 Reverting these two patches the regulators probe successfully. Any ideas? Regards, Fabio Estevam -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
