Hi,
On 21/02/2014 at 20:48:53 +0100, Alexandre Belloni wrote :
> + ahb {
> + apb {
> + mmc0: mmc@fffa4000 {
> + pinctrl-0 = <
> + &pinctrl_board_mmc0
> + &pinctrl_mmc0_clk
> + &pinctrl_mmc0_slot0_cmd_dat0
> + &pinctrl_mmc0_slot0_dat1_3>;
> + status = "okay";
> + slot@0 {
> + reg = <0>;
> + bus-width = <4>;
> + cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + usart0: serial@fffb0000 {
> + pinctrl-0 = <
> + &pinctrl_usart0
> + &pinctrl_usart0_rts
> + &pinctrl_usart0_cts>;
> + status = "okay";
> + };
> +
> + dbgu: serial@fffff200 {
> + status = "okay";
> + };
> +
> + pinctrl@fffff400 {
> + mmc0 {
> + pinctrl_board_mmc0: mmc0-board {
> + atmel,pins =
> + <AT91_PIOA 15
> AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
> + };
> + };
> + };
> +
> + watchdog@fffffd40 {
> + status = "okay";
> + };
> + };
> +
I just realised, do you want me to actually put the nand before the apb ?
> + nand0: nand@40000000 {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "soft";
> + nand-on-flash-bbt = <1>;
> + status = "okay";
> +
> + at91bootstrap@0 {
> + label = "at91bootstrap";
> + reg = <0x0 0x40000>;
> + };
> +
> + bootloader@40000 {
> + label = "bootloader";
> + reg = <0x40000 0x80000>;
> + };
> +
> + bootloaderenv@c0000 {
> + label = "bootloader env";
> + reg = <0xc0000 0xc0000>;
> + };
> +
> + dtb@180000 {
> + label = "device tree";
> + reg = <0x180000 0x80000>;
> + };
> +
> + kernel@200000 {
> + label = "kernel";
> + reg = <0x200000 0x600000>;
> + };
> +
> + rootfs@800000 {
> + label = "rootfs";
> + reg = <0x800000 0x0f800000>;
> + };
> + };
> + };
> +
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
