On Thu, Feb 20, 2014 at 09:12:15PM -0800, Julius Werner wrote:
> We have observed a rare cycle state desync bug after Set TR Dequeue
> Pointer commands on Intel LynxPoint xHCs (resulting in an endpoint that
> doesn't fetch new TRBs and thus an unresponsive USB device). It always
> triggers when a previous Set TR Dequeue Pointer command has set the
> pointer to the final Link TRB of a segment, and then another URB gets
> enqueued and cancelled again before it can be completed. Further
> investigation showed that the xHC had returned the Link TRB in the TRB
> Pointer field of the Transfer Event (CC == Stopped -- Length Invalid),
> but when xhci_find_new_dequeue_state() later accesses the Endpoint
> Context's TR Dequeue Pointer field it is set to the first TRB of the
> next segment.
>
> The driver expects those two values to be the same in this situation,
> and uses the cycle state of the latter together with the address of the
> former. This should be fine according to the XHCI specification, since
> the endpoint ring should be stopped when returning the Transfer Event
> and thus should not advance over the Link TRB before it gets restarted.
> However, real-world XHCI implementations apparently don't really care
> that much about these details, so the driver should follow a more
> defensive approach to try to work around HC spec violations.
Length Invalid can actually be returned when the host is "in between"
processing TRBs. Perhaps it had processed the link TRB, but hadn't
started processing the TRB at the top of the ring. So it's not a spec
violation per say, but definitely a spec ambiguity.
The patch looks fine. Mathias is taking over for xHCI driver
maintainership in 3.15. He's currently handling queuing bug fix patches
for 3.14 while I finish queueing feature patches for 3.15. Mathias,
will you test and queue this up for 3.14?
Signed-off-by: Sarah Sharp <sarah.a.sh...@linux.intel.com>
> This patch removes the stopped_trb variable that had been used to store
> the TRB Pointer from the last Transfer Event of a stopped TRB. Instead,
> xhci_find_new_dequeue_state() now relies only on the Endpoint Context,
> requiring a small amount of additional processing to find the virtual
> address corresponding to the TR Dequeue Pointer. Some other parts of the
> function were slightly rearranged to better fit into this model.
>
> This patch should be backported to kernels as old as 2.6.31 that contain
> the commit ae636747146ea97efa18e04576acd3416e2514f5 "USB: xhci: URB
> cancellation support."
>
> Signed-off-by: Julius Werner <jwer...@chromium.org>
> ---
> drivers/usb/host/xhci-ring.c | 66
> ++++++++++++++++++++------------------------
> drivers/usb/host/xhci.c | 1 -
> drivers/usb/host/xhci.h | 2 --
> 3 files changed, 30 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index a0b248c..b8277c7 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -549,6 +549,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
> struct xhci_generic_trb *trb;
> struct xhci_ep_ctx *ep_ctx;
> dma_addr_t addr;
> + u64 hw_dequeue;
>
> ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
> ep_index, stream_id);
> @@ -558,56 +559,56 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
> stream_id);
> return;
> }
> - state->new_cycle_state = 0;
> - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
> - "Finding segment containing stopped TRB.");
> - state->new_deq_seg = find_trb_seg(cur_td->start_seg,
> - dev->eps[ep_index].stopped_trb,
> - &state->new_cycle_state);
> - if (!state->new_deq_seg) {
> - WARN_ON(1);
> - return;
> - }
>
> /* Dig out the cycle state saved by the xHC during the stop ep cmd */
> xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
> "Finding endpoint context");
> ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
> - state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
> + hw_dequeue = le64_to_cpu(ep_ctx->deq);
> +
> + /* Find virtual address and segment of hardware dequeue pointer */
> + state->new_deq_seg = ep_ring->deq_seg;
> + state->new_deq_ptr = ep_ring->dequeue;
> + while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr)
> + != (dma_addr_t)(hw_dequeue & ~0x1)) {
> + next_trb(xhci, ep_ring, &state->new_deq_seg,
> + &state->new_deq_ptr);
> + if (state->new_deq_ptr == ep_ring->dequeue) {
> + WARN_ON(1);
> + return;
> + }
> + }
>
> + /*
> + * Find cycle state for last_trb, starting at old cycle state of
> + * hw_dequeue. If there is only one segment ring, find_trb_seg() will
> + * return immediately and cannot toggle the cycle state if this search
> + * wraps around, so add one more toggle manually in that case.
> + */
> + state->new_cycle_state = hw_dequeue & 0x1;
> + if (ep_ring->first_seg == ep_ring->first_seg->next &&
> + cur_td->last_trb < state->new_deq_ptr)
> + state->new_cycle_state ^= 0x1;
> state->new_deq_ptr = cur_td->last_trb;
> xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
> "Finding segment containing last TRB in TD.");
> state->new_deq_seg = find_trb_seg(state->new_deq_seg,
> - state->new_deq_ptr,
> - &state->new_cycle_state);
> + state->new_deq_ptr, &state->new_cycle_state);
> if (!state->new_deq_seg) {
> WARN_ON(1);
> return;
> }
>
> + /* Increment to find next TRB after last_trb. Cycle if appropriate. */
> trb = &state->new_deq_ptr->generic;
> if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
> (trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
> state->new_cycle_state ^= 0x1;
> next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
>
> - /*
> - * If there is only one segment in a ring, find_trb_seg()'s while loop
> - * will not run, and it will return before it has a chance to see if it
> - * needs to toggle the cycle bit. It can't tell if the stalled transfer
> - * ended just before the link TRB on a one-segment ring, or if the TD
> - * wrapped around the top of the ring, because it doesn't have the TD in
> - * question. Look for the one-segment case where stalled TRB's address
> - * is greater than the new dequeue pointer address.
> - */
> - if (ep_ring->first_seg == ep_ring->first_seg->next &&
> - state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
> - state->new_cycle_state ^= 0x1;
> + /* Don't update the ring cycle state for the producer (us). */
> xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
> "Cycle state = 0x%x", state->new_cycle_state);
> -
> - /* Don't update the ring cycle state for the producer (us). */
> xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
> "New dequeue segment = %p (virtual)",
> state->new_deq_seg);
> @@ -790,7 +791,6 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd
> *xhci, int slot_id,
> if (list_empty(&ep->cancelled_td_list)) {
> xhci_stop_watchdog_timer_in_irq(xhci, ep);
> ep->stopped_td = NULL;
> - ep->stopped_trb = NULL;
> ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
> return;
> }
> @@ -858,11 +858,9 @@ remove_finished_td:
> ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
> }
>
> - /* Clear stopped_td and stopped_trb if endpoint is not halted */
> - if (!(ep->ep_state & EP_HALTED)) {
> + /* Clear stopped_td if endpoint is not halted */
> + if (!(ep->ep_state & EP_HALTED))
> ep->stopped_td = NULL;
> - ep->stopped_trb = NULL;
> - }
>
> /*
> * Drop the lock and complete the URBs in the cancelled TD list.
> @@ -1907,14 +1905,12 @@ static void xhci_cleanup_halted_endpoint(struct
> xhci_hcd *xhci,
> struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
> ep->ep_state |= EP_HALTED;
> ep->stopped_td = td;
> - ep->stopped_trb = event_trb;
> ep->stopped_stream = stream_id;
>
> xhci_queue_reset_ep(xhci, slot_id, ep_index);
> xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
>
> ep->stopped_td = NULL;
> - ep->stopped_trb = NULL;
> ep->stopped_stream = 0;
>
> xhci_ring_cmd_db(xhci);
> @@ -1996,7 +1992,6 @@ static int finish_td(struct xhci_hcd *xhci, struct
> xhci_td *td,
> * the ring dequeue pointer or take this TD off any lists yet.
> */
> ep->stopped_td = td;
> - ep->stopped_trb = event_trb;
> return 0;
> } else {
> if (trb_comp_code == COMP_STALL) {
> @@ -2008,7 +2003,6 @@ static int finish_td(struct xhci_hcd *xhci, struct
> xhci_td *td,
> * USB class driver clear the stall later.
> */
> ep->stopped_td = td;
> - ep->stopped_trb = event_trb;
> ep->stopped_stream = ep_ring->stream_id;
> } else if (xhci_requires_manual_halt_cleanup(xhci,
> ep_ctx, trb_comp_code)) {
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index ad36439..dba5381 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -2933,7 +2933,6 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
> xhci_ring_cmd_db(xhci);
> }
> virt_ep->stopped_td = NULL;
> - virt_ep->stopped_trb = NULL;
> virt_ep->stopped_stream = 0;
> spin_unlock_irqrestore(&xhci->lock, flags);
>
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index f8416639..cf2c5f0 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -875,8 +875,6 @@ struct xhci_virt_ep {
> #define EP_GETTING_NO_STREAMS (1 << 5)
> /* ---- Related to URB cancellation ---- */
> struct list_head cancelled_td_list;
> - /* The TRB that was last reported in a stopped endpoint ring */
> - union xhci_trb *stopped_trb;
> struct xhci_td *stopped_td;
> unsigned int stopped_stream;
> /* Watchdog timer for stop endpoint command to cancel URBs */
> --
> 1.8.3.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
