The Armada 385 RD board is the reference design board from Marvell
for the Armada 385 SoC. This commit adds a Device Tree description for
this board, which enables the following features:
* Network interfaces
* I2C bus
* Serial port
* SPI bus, with a SPI flash
* PCIe interface
Signed-off-by: Gregory CLEMENT <gregory.clem...@free-electrons.com>
---
Changelog:
v1 -> v2:
- used the phy-mode "rgmii-id" to be able to work with the Marvell PHY
driver enabled
- put the ethernet nodes in the address order, as it has no effect to
change ti at this level (should be done at dtsi level)
- inverted the phy devices (which was improperly assigned in v1)
- added the vendor prefix for the SPI flash
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/armada-385-rd.dts | 94 +++++++++++++++++++++++++++++++++++++
2 files changed, 96 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/armada-385-rd.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7407ee8961cf..670897b9e915 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -153,7 +153,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-db.dtb
+ armada-385-db.dtb \
+ armada-385-rd.dtb
dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
diff --git a/arch/arm/boot/dts/armada-385-rd.dts
b/arch/arm/boot/dts/armada-385-rd.dts
new file mode 100644
index 000000000000..45250c88814b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-rd.dts
@@ -0,0 +1,94 @@
+/*
+ * Device Tree file for Marvell Armada 385 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clem...@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazz...@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+/ {
+ model = "Marvell Armada 385 Reference Design";
+ compatible = "marvell,a385-rd", "marvell,armada385",
"marvell,armada38x";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+ spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p128";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+
+ ethernet@30000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+
+ mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * One PCIe units is accessible through
+ * standard PCIe slot on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+};
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
