On 19/03/2014 11:26, Alexandre Belloni : > Avoids getting the newly introduced warning: > WARNING: DT compatible string "atmel,at91sam9g45-adc" appears un-documented > -- check ./Documentation/devicetree/bindings/ > + compatible = "atmel,at91sam9g45-adc"; > > Introduced by: > bff5da433525 checkpatch: add DT compatible string documentation checks > > Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
Ok, if it is needed. Acked-by: Nicolas Ferre <nicolas.fe...@atmel.com> BTW, I do not see the devicetree maintainers in the list of CC. If it is done for other architectures, I am fine with it, but if we are the only one to start this move, I would like them to be aware. Best regards, > --- > Documentation/devicetree/bindings/arm/atmel-aic.txt | 3 +-- > Documentation/devicetree/bindings/arm/atmel-at91.txt | 10 ++++------ > Documentation/devicetree/bindings/dma/atmel-dma.txt | 2 +- > Documentation/devicetree/bindings/gpio/gpio_atmel.txt | 2 +- > Documentation/devicetree/bindings/iio/adc/at91_adc.txt | 4 ++-- > Documentation/devicetree/bindings/serial/atmel-usart.txt | 10 ++++------ > 6 files changed, 13 insertions(+), 18 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt > b/Documentation/devicetree/bindings/arm/atmel-aic.txt > index 2742e9cfd6b1..95f75fd097ba 100644 > --- a/Documentation/devicetree/bindings/arm/atmel-aic.txt > +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt > @@ -1,8 +1,7 @@ > * Advanced Interrupt Controller (AIC) > > Required properties: > -- compatible: Should be "atmel,<chip>-aic" > - <chip> can be "at91rm9200" or "sama5d3" > +- compatible: "atmel,at91rm9200-aic", "atmel,sama5d3-aic" > - interrupt-controller: Identifies the node as an interrupt controller. > - interrupt-parent: For single AIC system, it is an empty property. > - #interrupt-cells: The number of cells to define the interrupts. It should > be 3. > diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt > b/Documentation/devicetree/bindings/arm/atmel-at91.txt > index 16f60b41c147..e79a33315e4f 100644 > --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt > +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt > @@ -14,8 +14,7 @@ System Timer (ST) required properties: > shared across all System Controller members. > > TC/TCLIB Timer required properties: > -- compatible: Should be "atmel,<chip>-tcb". > - <chip> can be "at91rm9200" or "at91sam9x5" > +- compatible: "atmel,at91rm9200-tcb", "atmel,at91sam9x5-tcb" > - reg: Should contain registers location and length > - interrupts: Should contain all interrupts for the TC block > Note that you can specify several interrupt cells if the TC > @@ -46,8 +45,7 @@ One interrupt per TC channel in a TC block: > }; > > RSTC Reset Controller required properties: > -- compatible: Should be "atmel,<chip>-rstc". > - <chip> can be "at91sam9260" or "at91sam9g45" > +- compatible: "atmel,at91sam9260-rstc", "atmel,at91sam9g45-rstc" > - reg: Should contain registers location and length > > Example: > @@ -80,8 +78,8 @@ Examples: > SHDWC Shutdown Controller > > required properties: > -- compatible: Should be "atmel,<chip>-shdwc". > - <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". > +- compatible: "atmel,at91sam9260-shdwc", "atmel,at91sam9rl-shdwc", > + "atmel,at91sam9x5-shdwc" > - reg: Should contain registers location and length > > optional properties: > diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt > b/Documentation/devicetree/bindings/dma/atmel-dma.txt > index f69bcf5a6343..410bff989949 100644 > --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt > +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt > @@ -1,7 +1,7 @@ > * Atmel Direct Memory Access Controller (DMA) > > Required properties: > -- compatible: Should be "atmel,<chip>-dma". > +- compatible: "atmel,at91sam9rl-dma", "atmel,at91sam9g45-dma" > - reg: Should contain DMA registers location and length. > - interrupts: Should contain DMA interrupt. > - #dma-cells: Must be <2>, used to represent the number of integer cells in > diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt > b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt > index 85f8c0d084fa..1fa10565adcc 100644 > --- a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt > +++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt > @@ -1,7 +1,7 @@ > * Atmel GPIO controller (PIO) > > Required properties: > -- compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5. > +- compatible: "atmel,at91rm9200-gpio", "atmel,at91rm9x5-gpio" > - reg: Should contain GPIO controller registers location and length > - interrupts: Should be the port interrupt shared by all the pins. > - #gpio-cells: Should be two. The first cell is the pin number and > diff --git a/Documentation/devicetree/bindings/iio/adc/at91_adc.txt > b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt > index 82061c7e4fea..ac26cc13dd9f 100644 > --- a/Documentation/devicetree/bindings/iio/adc/at91_adc.txt > +++ b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt > @@ -1,8 +1,8 @@ > * AT91's Analog to Digital Converter (ADC) > > Required properties: > - - compatible: Should be "atmel,<chip>-adc" > - <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5" > + - compatible: "atmel,at91sam9260-adc", "atmel,at91sam9rl-adc", > + "atmel,at91sam9g45-adc", "atmel,at91sam9x5-adc", > - reg: Should contain ADC registers location and length > - interrupts: Should contain the IRQ line for the ADC > - atmel,adc-channels-used: Bitmask of the channels muxed and enabled for > this > diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt > b/Documentation/devicetree/bindings/serial/atmel-usart.txt > index 9c5d19ac935c..ebc5b0cb7669 100644 > --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt > +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt > @@ -1,9 +1,7 @@ > * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) > > Required properties: > -- compatible: Should be "atmel,<chip>-usart" > - The compatible <chip> indicated will be the first SoC to support an > - additional mode or an USART new feature. > +- compatible: Should be "atmel,at91rm9200-usart", "atmel,at91sam9260-usart", > - reg: Should contain registers location and length > - interrupts: Should contain interrupt > - clock-names: tuple listing input clock names. > @@ -19,9 +17,9 @@ Optional properties: > Refer to dma.txt and atmel-dma.txt for details. > - dma-names: "rx" for RX channel, "tx" for TX channel. > > -<chip> compatible description: > -- at91rm9200: legacy USART support > -- at91sam9260: generic USART implementation for SAM9 SoCs > +compatible description: > +- atmel,at91rm9200-usart: legacy USART support > +- atmel,at91sam9260-usart: generic USART implementation for SAM9 SoCs > > Example: > - use PDC: > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/