Hi,
Tim Kryger wrote:
> On Mon, Apr 7, 2014 at 10:02 PM, Lothar Waßmann
> <l...@karo-electronics.de>wrote:
> >
> >
> > Thierry Reding wrote:
> >
> > > No. You cannot emulate polarity inversion in software.
> > >
> > Why not?
> >
> > duty_ns = period_ns - duty_ns;
> >
>
> Since I made the same mistake, I will pass along the pointer Thierry gave
> me.
>
> In include/linux/pwm.h the second difference for an inverted signal is
> described.
>
> /**
> * enum pwm_polarity - polarity of a PWM signal
> * @PWM_POLARITY_NORMAL: a high signal for the duration of the duty-
> * cycle, followed by a low signal for the remainder of the pulse
> * period
> * @PWM_POLARITY_INVERSED: a low signal for the duration of the duty-
> * cycle, followed by a high signal for the remainder of the pulse
> * period
> */
> enum pwm_polarity {
> PWM_POLARITY_NORMAL,
> PWM_POLARITY_INVERSED,
> };
>
> Of course, I suspect not all PWM hardware respects this definition of
> inverted output.
>
> Either way, hacking the duty in software certainly would get the high/low
> order wrong.
>
OK. But for a periodic signal this doesn't make any difference. It's
just a matter of where you set your reference point.
Only if you program the PWM to create a single cycle you would see the
difference. I wonder if this is a real life usecase though.
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | i...@karo-electronics.de
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
