On 14/04/14 08:41, Jungseok Lee wrote:
> This patch adds 4 levels of translation tables implementation for both
> HYP and stage2. A combination of 4KB + 4 levels host and 4KB + 4 levels
> guest can run on ARMv8 architecture as introducing this feature.
>
> Signed-off-by: Jungseok Lee <[email protected]>
> Reviewed-by: Sungjinn Chung <[email protected]>
> ---
> arch/arm/kvm/mmu.c | 96
> +++++++++++++++++++++++++++++++++-----
> arch/arm64/include/asm/kvm_arm.h | 20 ++++++++
> arch/arm64/include/asm/kvm_mmu.h | 1 +
> 3 files changed, 106 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
> index e0d4f24..6cf89ad 100644
> --- a/arch/arm/kvm/mmu.c
> +++ b/arch/arm/kvm/mmu.c
> @@ -388,13 +388,46 @@ static int create_hyp_pmd_mappings(pud_t *pud, unsigned
> long start,
> return 0;
> }
>
> +static int create_hyp_pud_mappings(pgd_t *pgd, unsigned long start,
> + unsigned long end, unsigned long pfn,
> + pgprot_t prot)
> +{
> + pud_t *pud;
> + pmd_t *pmd;
> + unsigned long addr, next;
> +
> + addr = start;
> + do {
> + pud = pud_offset(pgd, addr);
> +
> + if (pud_none_or_clear_bad(pud)) {
> + pmd = pmd_alloc_one(NULL, addr);
> + if (!pmd) {
> + kvm_err("Cannot allocate Hyp pmd\n");
> + return -ENOMEM;
> + }
> + pud_populate(NULL, pud, pmd);
> + get_page(virt_to_page(pud));
> + kvm_flush_dcache_to_poc(pud, sizeof(*pud));
> + }
> +
> + next = pud_addr_end(addr, end);
> +
> + create_hyp_pmd_mappings(pud, addr, next, pfn, prot);
> + pfn += (next - addr) >> PAGE_SHIFT;
> + } while (addr = next, addr != end);
> +
> + return 0;
> +}
> +
> static int __create_hyp_mappings(pgd_t *pgdp,
> unsigned long start, unsigned long end,
> unsigned long pfn, pgprot_t prot)
> {
> pgd_t *pgd;
> +#ifdef CONFIG_ARM64_4_LEVELS
> pud_t *pud;
> - pmd_t *pmd;
> +#endif
> unsigned long addr, next;
> int err = 0;
>
> @@ -403,22 +436,25 @@ static int __create_hyp_mappings(pgd_t *pgdp,
> end = PAGE_ALIGN(end);
> do {
> pgd = pgdp + pgd_index(addr);
> - pud = pud_offset(pgd, addr);
>
> - if (pud_none_or_clear_bad(pud)) {
> - pmd = pmd_alloc_one(NULL, addr);
> - if (!pmd) {
> - kvm_err("Cannot allocate Hyp pmd\n");
> +#ifdef CONFIG_ARM64_4_LEVELS
> + if (pgd_none(*pgd)) {
> + pud = pud_alloc_one(NULL, addr);
> + if (!pud) {
> + kvm_err("Cannot allocate Hyp pud\n");
> err = -ENOMEM;
> goto out;
> }
> - pud_populate(NULL, pud, pmd);
> - get_page(virt_to_page(pud));
> - kvm_flush_dcache_to_poc(pud, sizeof(*pud));
> + pgd_populate(NULL, pgd, pud);
> + get_page(virt_to_page(pgd));
> + kvm_flush_dcache_to_poc(pgd, sizeof(*pgd));
> }
> +#endif
Why do you need all these #ifdefs? The page table code should be able to
cope with all the variations of presence/absence of pud/pmd (see how
there is no code difference between 4kB (3 levels) and 64kB (2 levels)).
> next = pgd_addr_end(addr, end);
> - err = create_hyp_pmd_mappings(pud, addr, next, pfn, prot);
> +
> + err = create_hyp_pud_mappings(pgd, addr, next, pfn, prot);
> +
> if (err)
> goto out;
> pfn += (next - addr) >> PAGE_SHIFT;
> @@ -563,6 +599,26 @@ void kvm_free_stage2_pgd(struct kvm *kvm)
> kvm->arch.pgd = NULL;
> }
>
> +#ifdef CONFIG_ARM64_4_LEVELS
> +static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache
> + *cache, phys_addr_t addr)
> +{
> + pgd_t *pgd;
> + pud_t *pud;
> +
> + pgd = kvm->arch.pgd + pgd_index(addr);
> + if (pgd_none(*pgd)) {
> + if (!cache)
> + return NULL;
> + pud = mmu_memory_cache_alloc(cache);
> + pgd_populate(NULL, pgd, pud);
> + get_page(virt_to_page(pgd));
> + }
> +
> + return pud_offset(pgd, addr);
> +}
> +#endif
Same here.
> static pmd_t *stage2_get_pmd(struct kvm *kvm, struct kvm_mmu_memory_cache
> *cache, phys_addr_t addr)
> {
> @@ -617,6 +673,24 @@ static int stage2_set_pte(struct kvm *kvm, struct
> kvm_mmu_memory_cache *cache,
> pmd_t *pmd;
> pte_t *pte, old_pte;
>
> +#ifdef CONFIG_ARM64_4_LEVELS
> + pud_t *pud;
> +
> + /* Create stage-2 page table mapping - Level 0 */
> + pud = stage2_get_pud(kvm, cache, addr);
> + if (!pud)
> + return 0;
> +
> + if (pud_none(*pud)) {
> + if (!cache)
> + return 0;
> + pmd = mmu_memory_cache_alloc(cache);
> + kvm_clean_pmd(pmd);
> + pud_populate(NULL, pud, pmd);
> + get_page(virt_to_page(pud));
> + }
> +#endif
> +
And here.
> /* Create stage-2 page table mapping - Level 1 */
> pmd = stage2_get_pmd(kvm, cache, addr);
> if (!pmd) {
> @@ -675,7 +749,7 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t
> guest_ipa,
> for (addr = guest_ipa; addr < end; addr += PAGE_SIZE) {
> pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE);
>
> - ret = mmu_topup_memory_cache(&cache, 2, 2);
> + ret = mmu_topup_memory_cache(&cache, 3, 3);
It would be good to make this depend of the number of levels we're
actually using (2, 3 or 4).
> if (ret)
> goto out;
> spin_lock(&kvm->mmu_lock);
> diff --git a/arch/arm64/include/asm/kvm_arm.h
> b/arch/arm64/include/asm/kvm_arm.h
> index 3d69030..295eda6 100644
> --- a/arch/arm64/include/asm/kvm_arm.h
> +++ b/arch/arm64/include/asm/kvm_arm.h
> @@ -117,9 +117,11 @@
> #define VTCR_EL2_IRGN0_MASK (3 << 8)
> #define VTCR_EL2_IRGN0_WBWA (1 << 8)
> #define VTCR_EL2_SL0_MASK (3 << 6)
> +#define VTCR_EL2_SL0_LVL0 (2 << 6)
> #define VTCR_EL2_SL0_LVL1 (1 << 6)
> #define VTCR_EL2_T0SZ_MASK 0x3f
> #define VTCR_EL2_T0SZ_40B 24
> +#define VTCR_EL2_T0SZ_48B 16
>
> #ifdef CONFIG_ARM64_64K_PAGES
> /*
> @@ -134,6 +136,7 @@
> VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
> #define VTTBR_X (38 - VTCR_EL2_T0SZ_40B)
> #else
> +#ifndef CONFIG_ARM64_4_LEVELS
> /*
> * Stage2 translation configuration:
> * 40bits output (PS = 2)
> @@ -145,10 +148,27 @@
> VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
> VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
> #define VTTBR_X (37 - VTCR_EL2_T0SZ_40B)
> +#else
> +/*
> + * Stage2 translation configuration:
> + * 40bits output (PS = 2)
> + * 48bits input (T0SZ = 16)
> + * 4kB pages (TG0 = 0)
> + * 4 level page tables (SL = 2)
> + */
> +#define VTCR_EL2_FLAGS (VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER |
> \
> + VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
> + VTCR_EL2_SL0_LVL0 | VTCR_EL2_T0SZ_48B)
> +#define VTTBR_X (29 - VTCR_EL2_T0SZ_48B)
> +#endif
> #endif
>
> #define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
> +#ifndef CONFIG_ARM64_4_LEVELS
> #define VTTBR_BADDR_MASK (((1LLU << (40 - VTTBR_X)) - 1) <<
> VTTBR_BADDR_SHIFT)
> +#else
> +#define VTTBR_BADDR_MASK (((1LLU << (48 - VTTBR_X)) - 1) <<
> VTTBR_BADDR_SHIFT)
> +#endif
> #define VTTBR_VMID_SHIFT (48LLU)
> #define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT)
>
> diff --git a/arch/arm64/include/asm/kvm_mmu.h
> b/arch/arm64/include/asm/kvm_mmu.h
> index 7d29847..ec76cf3 100644
> --- a/arch/arm64/include/asm/kvm_mmu.h
> +++ b/arch/arm64/include/asm/kvm_mmu.h
> @@ -107,6 +107,7 @@ static inline bool kvm_is_write_fault(unsigned long esr)
> }
>
> static inline void kvm_clean_pgd(pgd_t *pgd) {}
> +static inline void kvm_clean_pmd(pud_t *pud) {}
> static inline void kvm_clean_pmd_entry(pmd_t *pmd) {}
> static inline void kvm_clean_pte(pte_t *pte) {}
> static inline void kvm_clean_pte_entry(pte_t *pte) {}
>
You'll need to add the 32bit ARM equivalent once you've removed the #ifdefs.
M.
--
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
