Hi, Jan
I think below change may be better:
{ PCI_VDEVICE(MARVELL_EXT, 0x9485), chip_9485 },

> Add support for the AOC-SAS2LP-MV8 SAS-2 controller from SuperMicro.
> This controller has subdevice id 0x9485 instead of 0x9480, and apparently
> this simple patch is the only thing needed to make it work.
> 
> # lspci -vn
> [...]
> 03:00.0 0104: 1b4b:9485 (rev 03)
>       Subsystem: 1b4b:9485
>       Flags: bus master, fast devsel, latency 0, IRQ 24
>       Memory at feba0000 (64-bit, non-prefetchable) [size=128K]
>       Memory at febc0000 (64-bit, non-prefetchable) [size=256K]
>       Expansion ROM at feb90000 [disabled] [size=64K]
>       Capabilities: [40] Power Management version 3
>       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>       Capabilities: [70] Express Endpoint, MSI 00
>       Capabilities: [100] Advanced Error Reporting
>       Capabilities: [140] Virtual Channel
>       Kernel driver in use: mvsas
>       Kernel modules: mvsas
> 
> Signed-off-by: Jan Kasprzak <k...@fi.muni.cz>
> 
> diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
> index 5ff978b..eacee48 100644
> --- a/drivers/scsi/mvsas/mv_init.c
> +++ b/drivers/scsi/mvsas/mv_init.c
> @@ -728,6 +728,15 @@ static struct pci_device_id mvs_pci_table[] = {
>               .class_mask     = 0,
>               .driver_data    = chip_9485,
>       },
> +     {
> +             .vendor         = PCI_VENDOR_ID_MARVELL_EXT,
> +             .device         = 0x9485,
> +             .subvendor      = PCI_ANY_ID,
> +             .subdevice      = 0x9485,
> +             .class          = 0,
> +             .class_mask     = 0,
> +             .driver_data    = chip_9485,
> +     },
>       { PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */
>       { PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 
> (exact
> model unknown) */
>       { PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 
> (exact
> model unknown) */
> 
> --
> | Jan "Yenya" Kasprzak  <kas at {fi.muni.cz - work | yenya.net - private}> |
> | New GPG 4096R/A45477D5 - see http://www.fi.muni.cz/~kas/pgp-rollover.txt |
> | http://www.fi.muni.cz/~kas/    Journal: http://www.fi.muni.cz/~kas/blog/
> |
>   There's clearly a balance between "octopus merges are fine" and "Christ,
>   that's not an octopus, that's a Cthulhu merge".         --Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to