> Ben Hutchings already submitted a patch for this twice, which I cc'd you
> on:
>
> http://marc.info/?t=139277203900003
>
> will you ack it? PCI_VDEVICE() is a sort of take it or leave it macro.
> It's not important and it will look untidy and a bit confusing having a
> mix of open coding and macros, so I'd say convert all or none.
>
Using open coding because PCI_VENDOR_ID_MARVELL_EXT was undefined before.
Now, we should use the macros instead of open coding.
>
>
> > > Add support for the AOC-SAS2LP-MV8 SAS-2 controller from SuperMicro.
> > > This controller has subdevice id 0x9485 instead of 0x9480, and apparently
> > > this simple patch is the only thing needed to make it work.
> > >
> > > # lspci -vn
> > > [...]
> > > 03:00.0 0104: 1b4b:9485 (rev 03)
> > > Subsystem: 1b4b:9485
> > > Flags: bus master, fast devsel, latency 0, IRQ 24
> > > Memory at feba0000 (64-bit, non-prefetchable) [size=128K]
> > > Memory at febc0000 (64-bit, non-prefetchable) [size=256K]
> > > Expansion ROM at feb90000 [disabled] [size=64K]
> > > Capabilities: [40] Power Management version 3
> > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> > > Capabilities: [70] Express Endpoint, MSI 00
> > > Capabilities: [100] Advanced Error Reporting
> > > Capabilities: [140] Virtual Channel
> > > Kernel driver in use: mvsas
> > > Kernel modules: mvsas
> > >
> > > Signed-off-by: Jan Kasprzak <k...@fi.muni.cz>
> > >
> > > diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
> > > index 5ff978b..eacee48 100644
> > > --- a/drivers/scsi/mvsas/mv_init.c
> > > +++ b/drivers/scsi/mvsas/mv_init.c
> > > @@ -728,6 +728,15 @@ static struct pci_device_id mvs_pci_table[] = {
> > > .class_mask = 0,
> > > .driver_data = chip_9485,
> > > },
> > > + {
> > > + .vendor = PCI_VENDOR_ID_MARVELL_EXT,
> > > + .device = 0x9485,
> > > + .subvendor = PCI_ANY_ID,
> > > + .subdevice = 0x9485,
> > > + .class = 0,
> > > + .class_mask = 0,
> > > + .driver_data = chip_9485,
> > > + },
> > > { PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */
> > > { PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4
> (exact
> > > model unknown) */
> > > { PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4
> (exact
> > > model unknown) */
> > >
> > > --
> > > | Jan "Yenya" Kasprzak <kas at {fi.muni.cz - work | yenya.net - private}>
> |
> > > | New GPG 4096R/A45477D5 - see http://www.fi.muni.cz/~kas/pgp-rollover.txt
> |
> > > | http://www.fi.muni.cz/~kas/ Journal:
> http://www.fi.muni.cz/~kas/blog/
> > > |
> > > There's clearly a balance between "octopus merges are fine" and "Christ,
> > > that's not an octopus, that's a Cthulhu merge". --Linus Torvalds
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> > the body of a message to majord...@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
