2014-05-06 15:27 GMT-07:00 Brian Lilly <br...@crystalfontz.com>: > It would appear that I don't have that commit. I could move to 3.14 > to see if it makes a difference, but the last couple of responses have > been on 3.12.18 -- or perhaps I'm missing something else.
I did miss that you were also seeing the problem in 3.12. At that point, I believe that the driver was working around a potential PHY bug that is not covered by the SMSC PHY driver, or that the MDIO timeout is simply not long enough, or that your MDIO interrupts fire much longer than what the timeout allows, or that these interrupts are not reliable. You could probably try to ignore the timeout and see if you get sensible data out of the MDIO bus regardless. > Please let me know if you have any questions. > > Thank you. > > Brian Lilly > Crystalfontz America, Incorporated > 12412 East Saltese Road > Spokane Valley, WA 99216 > br...@crystalfontz.com http://www.crystalfontz.com > Twitter: @Crystalfontz > US toll-free (888) 206-9720 voice (509) 892-1200 > > > On Tue, May 6, 2014 at 3:06 PM, Florian Fainelli <f.faine...@gmail.com> wrote: >> 2014-05-06 14:40 GMT-07:00 Brian Lilly <br...@crystalfontz.com>: >>> The PHY on board is the SMSC LAN8720 >>> >>> With the generic PHY driver selected: http://pastebin.com/A4MH4Ptw >>> >>> [ 28.828761] fec 800f0000.ethernet eth0: Freescale FEC PHY driver >>> [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1) >>> [ 28.840626] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >>> [ 30.827536] libphy: 800f0000.etherne:00 - Link is Up - 100/Full >>> [ 30.833739] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >>> [ 32.986999] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready >>> [ 37.316421] fec 800f0000.ethernet eth0: Freescale FEC PHY driver >>> [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1) >>> [ 38.345047] fec 800f0000.ethernet eth0: MDIO read timeout >>> [ 39.506210] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >>> [ 40.374961] fec 800f0000.ethernet eth0: MDIO read timeout >>> >>> With the SMSC PHY driver selected: http://pastebin.com/DhdDyrMv >>> >>> [ 28.778974] fec 800f0000.ethernet eth0: Freescale FEC PHY driver >>> [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1) >>> [ 28.791742] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >>> [ 30.773078] libphy: 800f0000.etherne:00 - Link is Up - 100/Full >>> [ 30.779286] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >>> [ 32.934692] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready >>> [ 37.242162] fec 800f0000.ethernet eth0: Freescale FEC PHY driver >>> [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1) >>> [ 38.270611] fec 800f0000.ethernet eth0: MDIO read timeout >>> [ 39.415256] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >>> [ 40.300454] fec 800f0000.ethernet eth0: MDIO read timeout >> >> Thanks for trying this, at least this is consistent no matter which >> PHY driver we are using. Just to rule out a potential PHY power-down >> issue, could you try to revert the following commit >> be9dad1f9f26604fb71c0d53ccb39a8f1d425807 ("net: phy: suspend phydev >> when going to HALTED") and see if that works better for you? >> >> Thanks! >> >>> >>> On Tue, May 6, 2014 at 12:24 PM, Florian Fainelli <f.faine...@gmail.com> >>> wrote: >>>> 2014-05-06 12:12 GMT-07:00 Brian Lilly <br...@crystalfontz.com>: >>>>> It is happening during boot up: >>>>> >>>>> <snip, kernel 3.12 > >>>>> >>>>> Configuring network interfaces... [ 35.117114] fec 800f0000.ethernet >>>>> eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] >>>> >>>> Note that the SMSC PHY driver is picked up here, and that specific >>>> driver implements a different phy_read_status() callback due to how >>>> the PHY operates. The PHY driver also overrides the config_init() >>>> callback to perform some PHY-specific initialization. See below for >>>> more. >>>> >>>>> (mii_bus:phy_addr=800f0000.etherne:00, irq=-1) >>>>> [ 35.129967] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>> udhcpc (v1.21.1) started >>>>> >>>>> Sending discover... >>>>> >>>>> [ 37.113901] libphy: 800f0000.etherne:00 - Link is Up - 100/Full >>>>> [ 37.120134] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >>>>> Sending discover... >>>>> >>>>> Sending select for 10.10.10.217... >>>>> Lease of 10.10.10.217 obtained, lease time 86400 >>>>> /etc/udhcpc.d/50default: Adding DNS 10.10.10.13 >>>>> [ 39.319957] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready >>>>> done. >>>>> Starting rpcbind daemon...done. >>>>> net.ipv4.conf.default.rp_filter = 1 >>>>> net.ipv4.conf.all.rp_filter = 1 >>>>> Mon Apr 14 22:40:00 UTC 2014 >>>>> INIT: Entering runlevel: 5 >>>>> Starting Xserver >>>>> Starting system message bus: dbus. >>>>> Starting Connection Manager >>>>> Starting wpa_supplicant >>>>> Successfully initialized wpa_supplicant >>>>> Starting Dropbear SSH server >>>>> [ 44.754915] fec 800f0000.ethernet eth0: Freescale FEC PHY driver >>>>> [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1) >>>> >>>> The correct PHY driver is selected here... >>>> >>>>> [ 45.781364] fec 800f0000.ethernet eth0: MDIO read timeout >>>>> [ 46.826170] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>> [ 47.811385] fec 800f0000.ethernet eth0: MDIO read timeout >>>> >>>> But we are still seeing MDIO read timeouts, which is not great. >>>> >>>>> >>>>> With a different kernel (3.14): >>>>> >>>>> [ 28.989897] fec 800f0000.ethernet eth0: Freescale FEC PHY driver >>>>> [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1) >>>>> [ 30.991210] libphy: 800f0000.etherne:00 - Link is Up - 100/Full >>>>> [ 37.369372] fec 800f0000.ethernet eth0: Freescale FEC PHY driver >>>>> [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1) >>>> >>>> Here, the Generic PHY driver has been selected, which will use the >>>> MII_BMSR register contents to determine the Link status and >>>> parameters. You might want to make sure that your board selects the >>>> appropriate PHY driver, such that we are not chasing two issues here. >>>> >>>>> [ 38.398346] fec 800f0000.ethernet eth0: MDIO read timeout >>>>> [ 39.438412] fec 800f0000.ethernet eth0: MDIO read timeout >>>>> [ 39.468419] fec 800f0000.ethernet eth0: MDIO write timeout >>>>> [ 40.498848] fec 800f0000.ethernet eth0: MDIO read timeout >>>> >>>> It would also be helpful to print the register that were accessed, >>>> such that you could correlate this with the exact steps in the PHY >>>> library state machine. Please also retry the experiment with the SMSC >>>> PHY driver enabled, as it does some PHY specific initialization that >>>> seems to be relevant. Then we are hopefully left with only the MDIO >>>> timeout issue and not the PHY mis-configuration + MDIO timeout. >>>> >>>>> >>>>> Afterward I have to ifdown eth0, ifup eth0 and then it functions >>>>> normally, without reverting the commit. >>>>> >>>>> root@cfa100xx:~# ifdown eth0 >>>>> [ 1154.679658] fec 800f0000.ethernet eth0: Freescale FEC PHY driver >>>>> [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1) >>>>> root@cfa100xx:~# ifup eth0 >>>>> udhcpc (v1.21.1) started >>>>> Sending discover... >>>>> [ 1156.679547] libphy: 800f0000.etherne:00 - Link is Up - 100/Full >>>>> Sending discover... >>>>> Sending select for 10.10.10.217... >>>>> Lease of 10.10.10.217 obtained, lease time 86400 >>>>> ip: RTNETLINK answers: File exists >>>>> >>>>> -- >>>>> Brian >>>>> >>>>> >>>>> On Tue, May 6, 2014 at 11:11 AM, Uwe Kleine-König >>>>> <u.kleine-koe...@pengutronix.de> wrote: >>>>>> Hello Brian, >>>>>> >>>>>> On Tue, May 06, 2014 at 09:44:34AM -0700, Brian Lilly wrote: >>>>>>> With commit a264b981f2c76e281ef27e7232774bf6c54ec865 we're having eth0 >>>>>>> come up, then brought right back down with an MDIO rx timeout moments >>>>>>> after. Adding back in the removed code keeps the interface alive and >>>>>>> it's working afterward without trouble. I've tested the re-inserted >>>>>>> code in 3.12, 3.14 without issue on our boards. >>>>>> So you can reliably trigger that problem? You're just doing >>>>>> >>>>>> ifconfig eth0 1.2.3.4 up >>>>>> >>>>>> (or equivalent) and the interface goes down without further >>>>>> interference with the above mentioned commit? The exact error you're >>>>>> seeing is >>>>>> >>>>>> MDIO read timeout >>>>>> >>>>>> (with some prefix saying something about fec and eth0 I think)? >>>>>> >>>>>> This error is also present with a264b981f2 reverted, just doesn't affect >>>>>> eth0 being functional? Does the timeout always happen, or only on >>>>>> specific addresses? >>>>>> >>>>>> This is not a proper fix, but does it help to increment FEC_MII_TIMEOUT? >>>>>> >>>>>>> Is there something else that can be done to prevent the MDIO timeouts? >>>>>>> We are using basically the same schematic for networking as the >>>>>>> imx28evk. >>>>>> Hard to say, but assuming it works just fine on the imx28evk for you, >>>>>> too, there seems to be some hardware difference that makes your machine >>>>>> fail. (That doesn't mean it's not fixable in software.) >>>>>> >>>>>> I don't know if a mdio read error is intended to make the device go >>>>>> down, maybe one the the netdev guys can answer that. >>>>>> Assuming that it's not intended, instrument the code, find out how that >>>>>> timeout makes your device go down and find the wrong branch. I'd start >>>>>> with adding stackdumps when the mdio timeout happens and when >>>>>> fec_enet_start_xmit is called with fep->link == 0. >>>>>> >>>>>> Best regards >>>>>> Uwe >>>>>> >>>>>> -- >>>>>> Pengutronix e.K. | Uwe Kleine-König >>>>>> | >>>>>> Industrial Linux Solutions | http://www.pengutronix.de/ >>>>>> | >>>>> -- >>>>> To unsubscribe from this list: send the line "unsubscribe netdev" in >>>>> the body of a message to majord...@vger.kernel.org >>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>> >>>> >>>> >>>> -- >>>> Florian >> >> >> >> -- >> Florian -- Florian -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
