> The PRCM (Power/Reset/Clock Management) block exposes several subdevices
> in different subsystems (clk, reset ...)
> 
> Add basic support for the PRCM unit with clk (AR100, AHB0, and APB0 clks)
> and reset controller subdevices.
> 
> Other subdevices might be added later (if needed).
> 
> Signed-off-by: Boris BREZILLON <boris.brezil...@free-electrons.com>
> ---
>  drivers/mfd/Kconfig      |   8 +++
>  drivers/mfd/Makefile     |   1 +
>  drivers/mfd/sun6i-prcm.c | 151 
> +++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 160 insertions(+)
>  create mode 100644 drivers/mfd/sun6i-prcm.c

[...]

> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/err.h>
> +#include <linux/spinlock.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/mutex.h>
> +#include <linux/completion.h>
> +#include <linux/irq.h>
> +#include <linux/jiffies.h>
> +#include <linux/bitops.h>
> +#include <linux/fs.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/uaccess.h>
> +#include <linux/mfd/core.h>

I'm pretty sure you don't need half of these.  Please only add the
ones you make use of.

[...]

> +     dev_info(&pdev->dev, "PRCM initialized\n");

Please remove this from here.

[...]

> +static struct platform_driver sun6i_prcm_driver = {
> +     .driver = {
> +             .name = "sun6i-prcm",
> +             .owner = THIS_MODULE,
> +             .of_match_table = sun6i_prcm_dt_ids,
> +     },
> +     .probe = sun6i_prcm_probe,

You need a .remove() call-back.

> +};
> +module_platform_driver(sun6i_prcm_driver);
> +
> +MODULE_AUTHOR("Boris BREZILLON <boris.brezil...@free-electrons.com>");
> +MODULE_DESCRIPTION("Allwinner sun6i PRCM driver");
> +MODULE_LICENSE("GPL v2");

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to