On Tue, May 13, 2014 at 07:29:52PM -0400, Nicolas Pitre wrote: > On Tue, 13 May 2014, Nicolas Pitre wrote: > > > On Tue, 13 May 2014, Stephen Warren wrote: > > > > > On 05/13/2014 03:50 PM, Doug Anderson wrote: > > > ... > > > > ...but then I found the true problem shows up when we transition > > > > between very low frequencies on exynos, like between 200MHz and > > > > 300MHz. While transitioning between frequencies the system > > > > temporarily bumps over to the "switcher" PLL running at 800MHz while > > > > waiting for the main PLL to stabilize. No CPUFREQ notification is > > > > sent for that. That means there's a period of time when we're running > > > > at 800MHz but loops_per_jiffy is calibrated at between 200MHz and > > > > 300MHz. > > > > > > > > > > > > I'm welcome to any suggestions for how to address this. It sorta > > > > feels like it would be a common thing to have a temporary PLL during > > > > the transition, ... > > > > > > We definitely do that on Tegra for some cpufreq transitions. > > > > Ouch... If this is a common strategy to use a third frequency during a > > transition phase, especially if that frequency is way off (800MHz vs > > 200-300MHz) then it is something the cpufreq layer must capture and > > advertise. > > Of course if only the loops_per_jiffy scaling does care about frequency > changes these days, and if in those cases udelay() can instead be moved > to a timer source on those hick-up prone platforms, then all this is > fairly theoretical and may not be worth pursuing.
As I've been saying... use a bloody timer. :) -- FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly improving, and getting towards what was expected from it. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/