The pinmux subsystem complained that the nvidia,low-power-mode property
is not supported by the sdio1, sdio3 and gma drive groups. In addition
gma also does not support nvidia,drive-type. Remove these properties so
the pinmux configuration can properly be applied.
Signed-off-by: Alexandre Courbot <acour...@nvidia.com>
---
arch/arm/boot/dts/tegra114-roth.dts | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/tegra114-roth.dts
b/arch/arm/boot/dts/tegra114-roth.dts
index 0b0e8e07d965..a67885250f81 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -730,7 +730,6 @@
nvidia,pins = "drive_sdio1";
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,low-power-mode =
<TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <36>;
nvidia,pull-up-strength = <20>;
nvidia,slew-rate-rising =
<TEGRA_PIN_SLEW_RATE_SLOW>;
@@ -740,7 +739,6 @@
nvidia,pins = "drive_sdio3";
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,low-power-mode =
<TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <36>;
nvidia,pull-up-strength = <20>;
nvidia,slew-rate-rising =
<TEGRA_PIN_SLEW_RATE_FASTEST>;
@@ -750,12 +748,10 @@
nvidia,pins = "drive_gma";
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,low-power-mode =
<TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <2>;
nvidia,pull-up-strength = <2>;
nvidia,slew-rate-rising =
<TEGRA_PIN_SLEW_RATE_FASTEST>;
nvidia,slew-rate-falling =
<TEGRA_PIN_SLEW_RATE_FASTEST>;
- nvidia,drive-type = <1>;
};
};
};
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
