Hi Boris,
On 06/25/2014 06:44 AM, Boris BREZILLON wrote:
Add ethernet-phy node to specify phy address (on the MDIO bus) and phy
interrupt (connected to pin PB25).
Define board specific delays to apply to RGMII signals.
Signed-off-by: Boris BREZILLON <[email protected]>
---
arch/arm/boot/dts/sama5d3xcm.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi
b/arch/arm/boot/dts/sama5d3xcm.dtsi
index b0b1331..2185ad8 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -34,6 +34,22 @@
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
The GMAC PHY address is 0x7 while not 0x1.
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ reg = <1>;
Nitpick: as usual, we will add "0x" prefix in reg property.
+ txen-skew-ps = <800>;
+ txc-skew-ps = <12000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <12000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
};
pmc: pmc@fffffc00 {
Best Regards,
Bo Shen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
