Hi Antoine,
On Monday 07 July 2014 03:46 PM, Antoine Ténart wrote:
> The Berlin SoC has a two SATA ports. Add a PHY driver to handle them.
>
> The mode selection can let us think this PHY can be configured to fit
> other purposes. But there are reasons to think the SATA mode will be
> the only one usable: the PHY registers are only accessible indirectly
> through two registers in the SATA range, the PHY seems to be integrated
> and no information tells us the contrary. For these reasons, make the
> driver a SATA PHY driver.
Thanks for doing multiple revisions of this. Looks good to be merged for me now.
Cheers
Kishon
>
> Signed-off-by: Antoine Ténart <antoine.ten...@free-electrons.com>
> ---
> drivers/phy/Kconfig | 7 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-berlin-sata.c | 284
> ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 292 insertions(+)
> create mode 100644 drivers/phy/phy-berlin-sata.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 16a2f067c242..8ad5c341b8f9 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -15,6 +15,13 @@ config GENERIC_PHY
> phy users can obtain reference to the PHY. All the users of this
> framework should select this config.
>
> +config PHY_BERLIN_SATA
> + tristate "Marvell Berlin SATA PHY driver"
> + depends on ARCH_BERLIN && HAS_IOMEM && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the SATA PHY on Marvell Berlin SoCs.
> +
> config PHY_EXYNOS_MIPI_VIDEO
> tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
> depends on HAS_IOMEM
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index b4f1d5770601..a137a2e23218 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -3,6 +3,7 @@
> #
>
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c
> new file mode 100644
> index 000000000000..c5e688b0899f
> --- /dev/null
> +++ b/drivers/phy/phy-berlin-sata.c
> @@ -0,0 +1,284 @@
> +/*
> + * Marvell Berlin SATA PHY driver
> + *
> + * Copyright (C) 2014 Marvell Technology Group Ltd.
> + *
> + * Antoine Ténart <antoine.ten...@free-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +
> +#define HOST_VSA_ADDR 0x0
> +#define HOST_VSA_DATA 0x4
> +#define PORT_SCR_CTL 0x2c
> +#define PORT_VSR_ADDR 0x78
> +#define PORT_VSR_DATA 0x7c
> +
> +#define CONTROL_REGISTER 0x0
> +#define MBUS_SIZE_CONTROL 0x4
> +
> +#define POWER_DOWN_PHY0 BIT(6)
> +#define POWER_DOWN_PHY1 BIT(14)
> +#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16)
> +#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19)
> +
> +#define PHY_BASE 0x200
> +
> +/* register 0x01 */
> +#define REF_FREF_SEL_25 BIT(0)
> +#define PHY_MODE_SATA (0x0 << 5)
> +
> +/* register 0x02 */
> +#define USE_MAX_PLL_RATE BIT(12)
> +
> +/* register 0x23 */
> +#define DATA_BIT_WIDTH_10 (0x0 << 10)
> +#define DATA_BIT_WIDTH_20 (0x1 << 10)
> +#define DATA_BIT_WIDTH_40 (0x2 << 10)
> +
> +/* register 0x25 */
> +#define PHY_GEN_MAX_1_5 (0x0 << 10)
> +#define PHY_GEN_MAX_3_0 (0x1 << 10)
> +#define PHY_GEN_MAX_6_0 (0x2 << 10)
> +
> +struct phy_berlin_desc {
> + struct phy *phy;
> + u32 power_bit;
> + unsigned index;
> +};
> +
> +struct phy_berlin_priv {
> + void __iomem *base;
> + spinlock_t lock;
> + struct clk *clk;
> + struct phy_berlin_desc **phys;
> + unsigned nphys;
> +};
> +
> +static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg, u32
> reg,
> + u32 mask, u32 val)
> +{
> + u32 regval;
> +
> + /* select register */
> + writel(PHY_BASE + reg, ctrl_reg + PORT_VSR_ADDR);
> +
> + /* set bits */
> + regval = readl(ctrl_reg + PORT_VSR_DATA);
> + regval &= ~mask;
> + regval |= val;
> + writel(regval, ctrl_reg + PORT_VSR_DATA);
> +}
> +
> +static int phy_berlin_sata_power_on(struct phy *phy)
> +{
> + struct phy_berlin_desc *desc = phy_get_drvdata(phy);
> + struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
> + void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80);
> + int ret = 0;
> + u32 regval;
> +
> + clk_prepare_enable(priv->clk);
> +
> + spin_lock(&priv->lock);
> +
> + /* Power on PHY */
> + writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
> + regval = readl(priv->base + HOST_VSA_DATA);
> + regval &= ~desc->power_bit;
> + writel(regval, priv->base + HOST_VSA_DATA);
> +
> + /* Configure MBus */
> + writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR);
> + regval = readl(priv->base + HOST_VSA_DATA);
> + regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128;
> + writel(regval, priv->base + HOST_VSA_DATA);
> +
> + /* set PHY mode and ref freq to 25 MHz */
> + phy_berlin_sata_reg_setbits(ctrl_reg, 0x1, 0xff,
> + REF_FREF_SEL_25 | PHY_MODE_SATA);
> +
> + /* set PHY up to 6 Gbps */
> + phy_berlin_sata_reg_setbits(ctrl_reg, 0x25, 0xc00, PHY_GEN_MAX_6_0);
> +
> + /* set 40 bits width */
> + phy_berlin_sata_reg_setbits(ctrl_reg, 0x23, 0xc00, DATA_BIT_WIDTH_40);
> +
> + /* use max pll rate */
> + phy_berlin_sata_reg_setbits(ctrl_reg, 0x2, 0x0, USE_MAX_PLL_RATE);
> +
> + /* set Gen3 controller speed */
> + regval = readl(ctrl_reg + PORT_SCR_CTL);
> + regval &= ~GENMASK(7, 4);
> + regval |= 0x30;
> + writel(regval, ctrl_reg + PORT_SCR_CTL);
> +
> + spin_unlock(&priv->lock);
> +
> + clk_disable_unprepare(priv->clk);
> +
> + return ret;
> +}
> +
> +static int phy_berlin_sata_power_off(struct phy *phy)
> +{
> + struct phy_berlin_desc *desc = phy_get_drvdata(phy);
> + struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
> + u32 regval;
> +
> + clk_prepare_enable(priv->clk);
> +
> + spin_lock(&priv->lock);
> +
> + /* Power down PHY */
> + writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
> + regval = readl(priv->base + HOST_VSA_DATA);
> + regval |= desc->power_bit;
> + writel(regval, priv->base + HOST_VSA_DATA);
> +
> + spin_unlock(&priv->lock);
> +
> + clk_disable_unprepare(priv->clk);
> +
> + return 0;
> +}
> +
> +static struct phy *phy_berlin_sata_phy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct phy_berlin_priv *priv = dev_get_drvdata(dev);
> + int i;
> +
> + if (WARN_ON(args->args[0] >= priv->nphys))
> + return ERR_PTR(-ENODEV);
> +
> + for (i = 0; i < priv->nphys; i++) {
> + if (priv->phys[i]->index == args->args[0])
> + break;
> + }
> +
> + if (i == priv->nphys)
> + return ERR_PTR(-ENODEV);
> +
> + return priv->phys[i]->phy;
> +}
> +
> +static struct phy_ops phy_berlin_sata_ops = {
> + .power_on = phy_berlin_sata_power_on,
> + .power_off = phy_berlin_sata_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static u32 phy_berlin_power_down_bits[] = {
> + POWER_DOWN_PHY0,
> + POWER_DOWN_PHY1,
> +};
> +
> +static int phy_berlin_sata_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *child;
> + struct phy *phy;
> + struct phy_provider *phy_provider;
> + struct phy_berlin_priv *priv;
> + struct resource *res;
> + int i = 0;
> + u32 phy_id;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res)
> + return -EINVAL;
> +
> + priv->base = devm_ioremap(dev, res->start, resource_size(res));
> + if (!priv->base)
> + return -ENOMEM;
> +
> + priv->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(priv->clk))
> + return PTR_ERR(priv->clk);
> +
> + priv->nphys = of_get_child_count(dev->of_node);
> + if (priv->nphys == 0)
> + return -ENODEV;
> +
> + priv->phys = devm_kzalloc(dev, priv->nphys * sizeof(*priv->phys),
> + GFP_KERNEL);
> + if (!priv->phys)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, priv);
> + spin_lock_init(&priv->lock);
> +
> + for_each_available_child_of_node(dev->of_node, child) {
> + struct phy_berlin_desc *phy_desc;
> +
> + if (of_property_read_u32(child, "reg", &phy_id)) {
> + dev_err(dev, "missing reg property in node %s\n",
> + child->name);
> + return -EINVAL;
> + }
> +
> + if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) {
> + dev_err(dev, "invalid reg in node %s\n", child->name);
> + return -EINVAL;
> + }
> +
> + phy_desc = devm_kzalloc(dev, sizeof(*phy_desc), GFP_KERNEL);
> + if (!phy_desc)
> + return -ENOMEM;
> +
> + phy = devm_phy_create(dev, &phy_berlin_sata_ops, NULL);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create PHY %d\n", phy_id);
> + return PTR_ERR(phy);
> + }
> +
> + phy_desc->phy = phy;
> + phy_desc->power_bit = phy_berlin_power_down_bits[phy_id];
> + phy_desc->index = phy_id;
> + phy_set_drvdata(phy, phy_desc);
> +
> + priv->phys[i++] = phy_desc;
> +
> + /* Make sure the PHY is off */
> + phy_berlin_sata_power_off(phy);
> + }
> +
> + phy_provider =
> + devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate);
> + if (IS_ERR(phy_provider))
> + return PTR_ERR(phy_provider);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id phy_berlin_sata_of_match[] = {
> + { .compatible = "marvell,berlin2q-sata-phy" },
> + { },
> +};
> +
> +static struct platform_driver phy_berlin_sata_driver = {
> + .probe = phy_berlin_sata_probe,
> + .driver = {
> + .name = "phy-berlin-sata",
> + .owner = THIS_MODULE,
> + .of_match_table = phy_berlin_sata_of_match,
> + },
> +};
> +module_platform_driver(phy_berlin_sata_driver);
> +
> +MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver");
> +MODULE_AUTHOR("Antoine Ténart <antoine.ten...@free-electrons.com>");
> +MODULE_LICENSE("GPL v2");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
