Feng,
On Wed, Jul 02, 2014 at 02:18:58PM -0700, Feng Kan wrote:
> This is to cleanup some hex numbers used in the code and replace
> then with defines to make the code cleaner.
>
> Signed-off-by: Feng Kan <f...@apm.com>
> Reviewed-by: Anup Patel <apa...@apm.com>
> ---
> drivers/irqchip/irq-gic.c | 62
> ++++++++++++++++++++++++++++-------------
> include/linux/irqchip/arm-gic.h | 2 --
> 2 files changed, 43 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> index 7e11c9d..9ec3f4c 100644
> --- a/drivers/irqchip/irq-gic.c
> +++ b/drivers/irqchip/irq-gic.c
> @@ -48,6 +48,23 @@
>
> #include "irqchip.h"
>
> +#define GIC_DIST_ENABLE 0x1
> +#define GIC_DIST_DISABLE 0x0
> +#define GIC_DIST_INT_CLR_EN_32 0xffffffff
> +#define GIC_DIST_INT_SET_EN_SGI 0x0000ffff
> +#define GIC_DIST_INT_CLR_EN_PPI 0xffff0000
Please watch your whitespace here...
> +#define GIC_DIST_INT_LVL_TRIGGER 0x0
> +#define GIC_DIST_INT_DEF_PRI 0xa0
> +#define GIC_DIST_INT_DEF_PRI_4 ((GIC_DIST_INT_DEF_PRI << 24) |\
> + (GIC_DIST_INT_DEF_PRI << 16) |\
> + (GIC_DIST_INT_DEF_PRI << 8) |\
> + GIC_DIST_INT_DEF_PRI)
> +
> +#define GIC_CPU_ENABLE 0x1
And here.
I imagine quite a few of these magic numbers were cleaned up in Marc's
series adding GICv3. Please see my response to your coverletter.
thx,
Jason.
> +#define GIC_CPU_INT_PRI_THRESHOLD 0xf0
> +#define GIC_CPU_INT_SPURIOUS 1023
> +#define GIC_CPU_INT_ID_MASK 0x3ff
> +
> union gic_base {
> void __iomem *common_base;
> void __percpu * __iomem *percpu_base;
> @@ -291,7 +308,7 @@ static void __exception_irq_entry gic_handle_irq(struct
> pt_regs *regs)
>
> do {
> irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
> - irqnr = irqstat & GICC_IAR_INT_ID_MASK;
> + irqnr = irqstat & GIC_CPU_INT_ID_MASK;
>
> if (likely(irqnr > 15 && irqnr < 1021)) {
> irqnr = irq_find_mapping(gic->domain, irqnr);
> @@ -322,8 +339,8 @@ static void gic_handle_cascade_irq(unsigned int irq,
> struct irq_desc *desc)
> status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
> raw_spin_unlock(&irq_controller_lock);
>
> - gic_irq = (status & 0x3ff);
> - if (gic_irq == 1023)
> + gic_irq = (status & GIC_CPU_INT_ID_MASK);
> + if (gic_irq == GIC_CPU_INT_SPURIOUS)
> goto out;
>
> cascade_irq = irq_find_mapping(chip_data->domain, gic_irq);
> @@ -384,13 +401,14 @@ static void __init gic_dist_init(struct gic_chip_data
> *gic)
> unsigned int gic_irqs = gic->gic_irqs;
> void __iomem *base = gic_data_dist_base(gic);
>
> - writel_relaxed(0, base + GIC_DIST_CTRL);
> + writel_relaxed(GIC_DIST_DISABLE, base + GIC_DIST_CTRL);
>
> /*
> * Set all global interrupts to be level triggered, active low.
> */
> for (i = 32; i < gic_irqs; i += 16)
> - writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
> + writel_relaxed(GIC_DIST_INT_LVL_TRIGGER,
> + base + GIC_DIST_CONFIG + i * 4 / 16);
>
> /*
> * Set all global interrupts to this CPU only.
> @@ -405,16 +423,18 @@ static void __init gic_dist_init(struct gic_chip_data
> *gic)
> * Set priority on all global interrupts.
> */
> for (i = 32; i < gic_irqs; i += 4)
> - writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
> + writel_relaxed(GIC_DIST_INT_DEF_PRI_4,
> + base + GIC_DIST_PRI + i * 4 / 4);
>
> /*
> * Disable all interrupts. Leave the PPI and SGIs alone
> * as these enables are banked registers.
> */
> for (i = 32; i < gic_irqs; i += 32)
> - writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4
> / 32);
> + writel_relaxed(GIC_DIST_INT_CLR_EN_32,
> + base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
>
> - writel_relaxed(1, base + GIC_DIST_CTRL);
> + writel_relaxed(GIC_DIST_ENABLE, base + GIC_DIST_CTRL);
> }
>
> static void gic_cpu_init(struct gic_chip_data *gic)
> @@ -443,17 +463,20 @@ static void gic_cpu_init(struct gic_chip_data *gic)
> * Deal with the banked PPI and SGI interrupts - disable all
> * PPI interrupts, ensure all SGI interrupts are enabled.
> */
> - writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
> - writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
> + writel_relaxed(GIC_DIST_INT_CLR_EN_PPI,
> + dist_base + GIC_DIST_ENABLE_CLEAR);
> + writel_relaxed(GIC_DIST_INT_SET_EN_SGI,
> + dist_base + GIC_DIST_ENABLE_SET);
>
> /*
> * Set priority on PPI and SGI interrupts
> */
> for (i = 0; i < 32; i += 4)
> - writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 /
> 4);
> + writel_relaxed(GIC_DIST_INT_DEF_PRI_4,
> + dist_base + GIC_DIST_PRI + i * 4 / 4);
>
> - writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
> - writel_relaxed(1, base + GIC_CPU_CTRL);
> + writel_relaxed(GIC_CPU_INT_PRI_THRESHOLD, base + GIC_CPU_PRIMASK);
> + writel_relaxed(GIC_CPU_ENABLE, base + GIC_CPU_CTRL);
> }
>
> void gic_cpu_if_down(void)
> @@ -519,14 +542,14 @@ static void gic_dist_restore(unsigned int gic_nr)
> if (!dist_base)
> return;
>
> - writel_relaxed(0, dist_base + GIC_DIST_CTRL);
> + writel_relaxed(GIC_DIST_DISABLE, dist_base + GIC_DIST_CTRL);
>
> for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
> writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
> dist_base + GIC_DIST_CONFIG + i * 4);
>
> for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
> - writel_relaxed(0xa0a0a0a0,
> + writel_relaxed(GIC_DIST_INT_DEF_PRI_4,
> dist_base + GIC_DIST_PRI + i * 4);
>
> for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
> @@ -537,7 +560,7 @@ static void gic_dist_restore(unsigned int gic_nr)
> writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
> dist_base + GIC_DIST_ENABLE_SET + i * 4);
>
> - writel_relaxed(1, dist_base + GIC_DIST_CTRL);
> + writel_relaxed(GIC_DIST_ENABLE, dist_base + GIC_DIST_CTRL);
> }
>
> static void gic_cpu_save(unsigned int gic_nr)
> @@ -591,10 +614,11 @@ static void gic_cpu_restore(unsigned int gic_nr)
> writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
>
> for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
> - writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
> + writel_relaxed(GIC_DIST_INT_DEF_PRI_4,
> + dist_base + GIC_DIST_PRI + i * 4);
>
> - writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
> - writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
> + writel_relaxed(GIC_CPU_INT_PRI_THRESHOLD, cpu_base + GIC_CPU_PRIMASK);
> + writel_relaxed(GIC_CPU_ENABLE, cpu_base + GIC_CPU_CTRL);
> }
>
> static int gic_notifier(struct notifier_block *self, unsigned long cmd,
> void *v)
> diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
> index 45e2d8c..7ed92d0 100644
> --- a/include/linux/irqchip/arm-gic.h
> +++ b/include/linux/irqchip/arm-gic.h
> @@ -21,8 +21,6 @@
> #define GIC_CPU_ACTIVEPRIO 0xd0
> #define GIC_CPU_IDENT 0xfc
>
> -#define GICC_IAR_INT_ID_MASK 0x3ff
> -
> #define GIC_DIST_CTRL 0x000
> #define GIC_DIST_CTR 0x004
> #define GIC_DIST_IGROUP 0x080
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
