This makes the SATA PLL be controlled by hardware instead of software.
This is required for working SATA support.
Signed-off-by: Mikko Perttunen <mperttu...@nvidia.com>
---
Already ACKed.
drivers/clk/tegra/clk-pll.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 637b62c..f070c36 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -110,6 +110,9 @@
#define XUSBIO_PLL_CFG0_SEQ_ENABLE BIT(24)
#define XUSBIO_PLL_CFG0_SEQ_START_STATE BIT(25)
+#define SATA_PLL_CFG0 0x490
+#define SATA_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0)
+
#define PLLE_MISC_PLLE_PTS BIT(8)
#define PLLE_MISC_IDDQ_SW_VALUE BIT(13)
#define PLLE_MISC_IDDQ_SW_CTRL BIT(14)
@@ -1361,6 +1364,11 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw)
val |= XUSBIO_PLL_CFG0_SEQ_ENABLE;
pll_writel(val, XUSBIO_PLL_CFG0, pll);
+ /* Enable hw control of SATA pll */
+ val = pll_readl(SATA_PLL_CFG0, pll);
+ val &= ~SATA_PLL_CFG0_PADPLL_RESET_SWCTL;
+ pll_writel(val, SATA_PLL_CFG0, pll);
+
out:
if (pll->lock)
spin_unlock_irqrestore(pll->lock, flags);
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
