Martin Zwickel <[EMAIL PROTECTED]> wrote:
>
> Hi,
>
> just tried the 2.6.11-mm3 and at boot-time my start scripts try to
> enable DMA on my disk (hdparm -m16 -c1 -u1 -X69 /dev/hda).
>
> But while running hdparm, the kernel waits many seconds and gives me
> some DMA warnings/errors:
>
> ...
>
> hda: set_drive_speed_status: status=0xd0 { Busy }
>
> ide: failed opcode was: unknown
> hda: dma_timer_expiry: dma status == 0x41
> hda: DMA timeout error
> hda: dma timeout error: status=0xd0 { Busy }
> ...
>
> That happened also with 2.6.11-rc3 since I thought I should switch away
> from my 2.6.8-rc2-mm1 (the best kernel ever ;)).
Could you please check whether 2.6.11-rc1 does this? It should be released
mid-week. Thanks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
