Russell and Fabio, > I'd be interested to hear whether removing the > > interrupts-extended = ... > > property from your board's DT file, thereby causing you to revert back to the > default I list above, also fixes the instability you are seeing.
We have tried to remove the board specific interrupts-extended field and the MX6QDL_PAD_GPIO_6__ENET_IRQ entry. Sadly this did not seem to improve the stalls. Our interrupts look like this now: 150: 15519 0 0 0 GIC 150 2188000.ethernet 151: 0 0 0 0 GIC 151 2188000.ethernet Our device tree might still be slightly incorrect. We have noticed that our RGMII_INT is connected to GPIO 19 (P5) which might be nonstandard (we are a bit surprised that this works at all). We are not quite sure how to configure this properly. Best regards, Mattis Lorentzon *************************************************************** Consider the environment before printing this message. To read Autoliv's Information and Confidentiality Notice, follow this link: http://www.autoliv.com/disclaimer.html *************************************************************** -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
