This adds simple cleanups for stmmac, removing test we know is always true, fixing whitespace, and moving code out of if().
Signed-off-by: Pavel Machek <[email protected]> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index c62e67f..5041090 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -261,11 +261,11 @@ static int stmmac_ethtool_getsettings(struct net_device *dev, ethtool_cmd_speed_set(cmd, priv->xstats.pcs_speed); /* Get and convert ADV/LP_ADV from the HW AN registers */ - if (priv->hw->mac->get_adv) - priv->hw->mac->get_adv(priv->ioaddr, &adv); - else + if (!priv->hw->mac->get_adv) return -EOPNOTSUPP; /* should never happen indeed */ + priv->hw->mac->get_adv(priv->ioaddr, &adv); + /* Encoding of PSE bits is defined in 802.3z, 37.2.1.4 */ if (adv.pause & STMMAC_PCS_PAUSE) @@ -340,20 +340,17 @@ static int stmmac_ethtool_setsettings(struct net_device *dev, if (cmd->autoneg != AUTONEG_ENABLE) return -EINVAL; - if (cmd->autoneg == AUTONEG_ENABLE) { - mask &= (ADVERTISED_1000baseT_Half | - ADVERTISED_1000baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full); - - spin_lock(&priv->lock); - if (priv->hw->mac->ctrl_ane) - priv->hw->mac->ctrl_ane(priv->ioaddr, 1); - spin_unlock(&priv->lock); - } - + mask &= (ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full); + + spin_lock(&priv->lock); + if (priv->hw->mac->ctrl_ane) + priv->hw->mac->ctrl_ane(priv->ioaddr, 1); + spin_unlock(&priv->lock); return 0; } diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 057a120..749d923 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -818,7 +818,7 @@ static int stmmac_init_phy(struct net_device *dev) /* Stop Advertising 1000BASE Capability if interface is not GMII */ if ((interface == PHY_INTERFACE_MODE_MII) || (interface == PHY_INTERFACE_MODE_RMII) || - (max_speed < 1000 && max_speed > 0)) + (max_speed < 1000 && max_speed > 0)) phydev->advertising &= ~(SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index a5b1e1b..8dd0408 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -253,7 +253,7 @@ int stmmac_mdio_register(struct net_device *ndev) } /* - * If we're going to bind the MAC to this PHY bus, + * If we're going to bind the MAC to this PHY bus, * and no PHY number was provided to the MAC, * use the one probed here. */ -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
