To determine the correct divisor, we need to know the difference between
the desired baud rate and the actual baud rate. The calculation for this
difference is implemented twice within omap_serial_baud_is_mode16().
Pull out the calculation for easier maintenance.
Signed-off-by: Frans Klaver <frans.kla...@xsens.com>
---
drivers/tty/serial/omap-serial.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d017cec..ae935ce 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -239,6 +239,22 @@ static void serial_omap_enable_wakeup(struct
uart_omap_port *up, bool enable)
}
/*
+ * Calculate the absolute difference between the desired and actual baud
+ * rate for the given mode.
+ */
+static inline int calculate_baud_abs_diff(struct uart_port *port,
+ unsigned int baud, unsigned int mode)
+{
+ unsigned int n = port->uartclk / (mode * baud);
+ int abs_diff = baud - (port->uartclk / (mode * n));
+
+ if (abs_diff < 0)
+ abs_diff = -abs_diff;
+
+ return abs_diff;
+}
+
+/*
* serial_omap_baud_is_mode16 - check if baud rate is MODE16X
* @port: uart port info
* @baud: baudrate for which mode needs to be determined
@@ -252,14 +268,8 @@ static void serial_omap_enable_wakeup(struct
uart_omap_port *up, bool enable)
static bool
serial_omap_baud_is_mode16(struct uart_port *port, unsigned int baud)
{
- unsigned int n13 = port->uartclk / (13 * baud);
- unsigned int n16 = port->uartclk / (16 * baud);
- int baudAbsDiff13 = baud - (port->uartclk / (13 * n13));
- int baudAbsDiff16 = baud - (port->uartclk / (16 * n16));
- if (baudAbsDiff13 < 0)
- baudAbsDiff13 = -baudAbsDiff13;
- if (baudAbsDiff16 < 0)
- baudAbsDiff16 = -baudAbsDiff16;
+ int baudAbsDiff13 = calculate_baud_abs_diff(port, baud, 13);
+ int baudAbsDiff16 = calculate_baud_abs_diff(port, baud, 16);
return (baudAbsDiff13 >= baudAbsDiff16);
}
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
