On 19/08/14 07:03, Iain Paton wrote: > On 17/08/14 22:46, Fabio Estevam wrote: >> Iain, >> >> On Sun, Aug 17, 2014 at 6:34 PM, Iain Paton <ipat...@gmail.com> wrote: >>> On 15/08/14 06:42, Mattis Lorentzon wrote: >>> >>>> We mostly run SSH with benchmarks using NFS, it can probably be >>>> triggered by using only SSH with the following loop: >>>> >>>> # while : ; do ssh arm-card date; done >>> >>> Mattis, >>> >>> What sort of time does it take for you to see a problem? >>> >>> I've been running the above for nearly two days on 3.16.0 on a board >>> with fec interrupts routed through gpio_6 and haven't seen a hint of >>> a problem. >> >> Thanks for testing. >> >> Which mx6 board have you used on this test? > > It's currently pointed at a RIoTboard (atheros phy) but I'm happy to > try it against both a Sabre-Lite and a Wandboard B1, all running the > same kernel binary, as well. > > I'm interested enough in why different people get different results > with this that I'll put some time towards testing to try to help > narrow down the cause. >
two and a half days of running this against both a sabre-lite and a wandboard quad B1 and I still have no reason to think there's any sort of a problem. Up to now, my testing has been done with my own config, I'll now repeat the whole thing using the config Mattis posted to see if I can reproduce it that way. Suggestions on a better / easier / quicker way to reproduce it are welcome. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
