Hi Daniel,
On 20/08/14 01:16, Daniel Thompson wrote:
As part of the migration a couple of uart definitions have been copied
from of the platform specific header files.
Note that, in order to keep oldconfig working nicely we must defer the
removal of arch/arm/mach-ks8695/include/mach/debug-macro.S until
DEBUG_LL_UART_NONE has been removed.
Signed-off-by: Daniel Thompson <daniel.thomp...@linaro.org>
Cc: Russell King <li...@arm.linux.org.uk>
Cc: Greg Ungerer <g...@uclinux.org>
Cc: Arnd Bergmann <arnd.bergm...@linaro.org>
---
arch/arm/Kconfig.debug | 8 ++++++++
.../include/mach/debug-macro.S => include/debug/ks8695.S} | 10 +++++++---
2 files changed, 15 insertions(+), 3 deletions(-)
rename arch/arm/{mach-ks8695/include/mach/debug-macro.S =>
include/debug/ks8695.S} (80%)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9c46729..97c3058 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -348,6 +348,13 @@ choice
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on KEYSTONE2 devices.
+ config DEBUG_KS8695_UART
+ bool "KS8695 Debug UART"
+ depends on ARCH_KS8695
+ help
+ Say Y here if you want kernel low-level debugging support
+ on KS8695.
+
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
depends on ARCH_MMP
@@ -1017,6 +1024,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART
+ default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S
b/arch/arm/include/debug/ks8695.S
similarity index 80%
rename from arch/arm/mach-ks8695/include/mach/debug-macro.S
rename to arch/arm/include/debug/ks8695.S
index a79e489..961da1f 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/ks8695.S
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-ks8695/include/mach/debug-macro.S
+ * arch/arm/include/debug/ks8695.S
*
* Copyright (C) 2006 Ben Dooks <b...@simtec.co.uk>
* Copyright (C) 2006 Simtec Electronics
@@ -11,8 +11,12 @@
* published by the Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/regs-uart.h>
+#define KS8695_UART_PA 0x03ffe000
+#define KS8695_UART_VA 0xf00fe000
+#define KS8695_URTH (0x04)
+#define KS8695_URLS (0x14)
+#define URLS_URTE (1 << 6)
+#define URLS_URTHRE (1 << 5)
Whats the thinking behind moving these definitions here?
Is there a plan to move/change regs-uart.h?
Regards
Greg
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
