Am Samstag, 30. August 2014, 21:15:53 schrieb Jonathan Cameron: > On 30/08/14 14:07, Heiko Stübner wrote: > > Older Rockchip SoCs, at least the rk3066, used a slightly modified saradc > > for temperature measurements. This so called tsadc does not contain any > > active parts like temperature interrupts and only supports polling the > > current temperature. The returned voltage can then be converted by a > > suitable thermal driver to and actual temperature and used for thermal > > handling. > > > > Signed-off-by: Heiko Stuebner <[email protected]> > > Looks, good to me, but will let this sit for a few days for other comments > on it.
ok, cool > Long shot, but are the docs for the vairous rockchip parts > publically available somewhere? Not publically, at this point ... maybe somewhere in the future [hope :-) ] Heiko > > > --- > > This is a different IP than the rk3288-tsadc Ceasar provided a driver for. > > As the commit messages states, the one used on the rk3066 is just a > > saradc, > > while the new tsadc in the rk3288 contains active components for thermal > > handling. > > > > A working example using the pending iio-thermal driver can found on > > https://github.com/mmind/linux-rockchip/commit/c07e02f069d9677d489f2541766 > > 19fae36f2aad0> > > .../bindings/iio/adc/rockchip-saradc.txt | 2 +- > > drivers/iio/adc/rockchip_saradc.c | 62 > > +++++++++++++++++----- 2 files changed, 50 insertions(+), 14 > > deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt > > b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt index > > 5d3ec1d..a9a5fe1 100644 > > --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt > > +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt > > @@ -1,7 +1,7 @@ > > > > Rockchip Successive Approximation Register (SAR) A/D Converter bindings > > > > Required properties: > > -- compatible: Should be "rockchip,saradc" > > +- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc" > > > > - reg: physical base address of the controller and length of memory > > mapped > > > > region. > > > > - interrupts: The interrupt number to the cpu. The interrupt specifier > > format> > > diff --git a/drivers/iio/adc/rockchip_saradc.c > > b/drivers/iio/adc/rockchip_saradc.c index e074a0b..7effada 100644 > > --- a/drivers/iio/adc/rockchip_saradc.c > > +++ b/drivers/iio/adc/rockchip_saradc.c > > @@ -18,13 +18,13 @@ > > > > #include <linux/interrupt.h> > > #include <linux/io.h> > > #include <linux/of.h> > > > > +#include <linux/of_device.h> > > > > #include <linux/clk.h> > > #include <linux/completion.h> > > #include <linux/regulator/consumer.h> > > #include <linux/iio/iio.h> > > > > #define SARADC_DATA 0x00 > > > > -#define SARADC_DATA_MASK 0x3ff > > > > #define SARADC_STAS 0x04 > > #define SARADC_STAS_BUSY BIT(0) > > > > @@ -38,15 +38,22 @@ > > > > #define SARADC_DLY_PU_SOC 0x0c > > #define SARADC_DLY_PU_SOC_MASK 0x3f > > > > -#define SARADC_BITS 10 > > > > #define SARADC_TIMEOUT msecs_to_jiffies(100) > > > > +struct rockchip_saradc_data { > > + int num_bits; > > + const struct iio_chan_spec *channels; > > + int num_channels; > > + unsigned long clk_rate; > > +}; > > + > > > > struct rockchip_saradc { > > > > void __iomem *regs; > > struct clk *pclk; > > struct clk *clk; > > struct completion completion; > > struct regulator *vref; > > > > + const struct rockchip_saradc_data *data; > > > > u16 last_val; > > > > }; > > > > @@ -90,7 +97,7 @@ static int rockchip_saradc_read_raw(struct iio_dev > > *indio_dev,> > > } > > > > *val = ret / 1000; > > > > - *val2 = SARADC_BITS; > > + *val2 = info->data->num_bits; > > > > return IIO_VAL_FRACTIONAL_LOG2; > > > > default: > > return -EINVAL; > > > > @@ -103,7 +110,7 @@ static irqreturn_t rockchip_saradc_isr(int irq, void > > *dev_id)> > > /* Read value */ > > info->last_val = readl_relaxed(info->regs + SARADC_DATA); > > > > - info->last_val &= SARADC_DATA_MASK; > > + info->last_val &= BIT(info->data->num_bits) - 1; > > > > /* Clear irq & power down adc */ > > writel_relaxed(0, info->regs + SARADC_CTRL); > > > > @@ -133,12 +140,44 @@ static const struct iio_chan_spec > > rockchip_saradc_iio_channels[] = {> > > ADC_CHANNEL(2, "adc2"), > > > > }; > > > > +static const struct rockchip_saradc_data saradc_data = { > > + .num_bits = 10, > > + .channels = rockchip_saradc_iio_channels, > > + .num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels), > > + .clk_rate = 1000000, > > +}; > > + > > +static const struct iio_chan_spec rockchip_rk3066_tsadc_iio_channels[] = > > { > > + ADC_CHANNEL(0, "adc0"), > > + ADC_CHANNEL(1, "adc1"), > > +}; > > + > > +static const struct rockchip_saradc_data rk3066_tsadc_data = { > > + .num_bits = 12, > > + .channels = rockchip_rk3066_tsadc_iio_channels, > > + .num_channels = ARRAY_SIZE(rockchip_rk3066_tsadc_iio_channels), > > + .clk_rate = 50000, > > +}; > > + > > +static const struct of_device_id rockchip_saradc_match[] = { > > + { > > + .compatible = "rockchip,saradc", > > + .data = &saradc_data, > > + }, { > > + .compatible = "rockchip,rk3066-tsadc", > > + .data = &rk3066_tsadc_data, > > + }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, rockchip_saradc_match); > > + > > > > static int rockchip_saradc_probe(struct platform_device *pdev) > > { > > > > struct rockchip_saradc *info = NULL; > > struct device_node *np = pdev->dev.of_node; > > struct iio_dev *indio_dev = NULL; > > struct resource *mem; > > > > + const struct of_device_id *match; > > > > int ret; > > int irq; > > > > @@ -152,6 +191,9 @@ static int rockchip_saradc_probe(struct > > platform_device *pdev)> > > } > > info = iio_priv(indio_dev); > > > > + match = of_match_device(rockchip_saradc_match, &pdev->dev); > > + info->data = match->data; > > + > > > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > info->regs = devm_ioremap_resource(&pdev->dev, mem); > > if (IS_ERR(info->regs)) > > > > @@ -195,7 +237,7 @@ static int rockchip_saradc_probe(struct > > platform_device *pdev)> > > * Use a default of 1MHz for the converter clock. > > * This may become user-configurable in the future. > > */ > > > > - ret = clk_set_rate(info->clk, 1000000); > > + ret = clk_set_rate(info->clk, info->data->clk_rate); > > > > if (ret < 0) { > > > > dev_err(&pdev->dev, "failed to set adc clk rate, %d\n", ret); > > return ret; > > > > @@ -227,8 +269,8 @@ static int rockchip_saradc_probe(struct > > platform_device *pdev)> > > indio_dev->info = &rockchip_saradc_iio_info; > > indio_dev->modes = INDIO_DIRECT_MODE; > > > > - indio_dev->channels = rockchip_saradc_iio_channels; > > - indio_dev->num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels); > > + indio_dev->channels = info->data->channels; > > + indio_dev->num_channels = info->data->num_channels; > > > > ret = iio_device_register(indio_dev); > > if (ret) > > > > @@ -296,12 +338,6 @@ static int rockchip_saradc_resume(struct device *dev) > > > > static SIMPLE_DEV_PM_OPS(rockchip_saradc_pm_ops, > > > > rockchip_saradc_suspend, rockchip_saradc_resume); > > > > -static const struct of_device_id rockchip_saradc_match[] = { > > - { .compatible = "rockchip,saradc" }, > > - {}, > > -}; > > -MODULE_DEVICE_TABLE(of, rockchip_saradc_match); > > - > > > > static struct platform_driver rockchip_saradc_driver = { > > > > .probe = rockchip_saradc_probe, > > .remove = rockchip_saradc_remove, -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
