Chris,
On Mon, Sep 1, 2014 at 2:07 AM, Chris Zhong <z...@rock-chips.com> wrote:
> Add device tree bindings documentation and a header file
> for rockchip's RK808 pmic.
>
> Signed-off-by: Chris Zhong <z...@rock-chips.com>
> Signed-off-by: Zhang Qing <zhangq...@rock-chips.com>
>
> ---
>
> Changes in v7:
> Advices by Mark Rutland
> - modify description about clock-cells
> - update the example
>
> Changes in v6:
> Advices by Mark Rutland
> - add description about clock-cells
> Advices by Doug
> - modify description about regulator
> - remove pinctrl description
>
> Changes in v5:
> Advices by Mark Brown
> - add description about regulator valid name.
> - add a header file "rockchip,rk808".
>
> Changes in v4:
> Advices by Doug
> - add a "#clock-cells" propertiy
> - update the example
>
> Changes in v3: None
> Changes in v2: None
>
> Documentation/devicetree/bindings/mfd/rk808.txt | 166
> +++++++++++++++++++++++
> include/dt-bindings/clock/rockchip,rk808.h | 11 ++
> 2 files changed, 177 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/rk808.txt
> create mode 100644 include/dt-bindings/clock/rockchip,rk808.h
>
> diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt
> b/Documentation/devicetree/bindings/mfd/rk808.txt
> new file mode 100644
> index 0000000..f8932ac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rk808.txt
> @@ -0,0 +1,166 @@
> +RK808 Power Management Integrated Circuit
> +
> +Required properties:
> +- compatible: "rockchip,rk808"
> +- reg: I2C slave address
> +- interrupt-parent: The parent interrupt controller.
> +- interrupts: the interrupt outputs of the controller.
> +- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
> + outputs)
I think Mark Rutland was looking for something like:
- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
> +Optional properties:
> +- clock-output-names: From common clock binding to override the
> + default output clock name
> +- rockchip,system-power-controller: Telling whether or not this pmic is
> controlling
> + the system power.
> +
> +Regulators: All the regulators of RK808 to be instantiated shall be
> +listed in a child node named 'regulators'. Each regulator is represented
> +by a child node of the 'regulators' node.
> +
> + regulator-name {
> + /* standard regulator bindings here */
> + };
> +
> +Following regulators of the RK808 PMIC block are supported. Note that
> +the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or
> LDO
> +number as described in RK808 datasheet.
> +
> + - DCDC_REGn
> + - valid values for n are 1 to 4.
> + - LDO_REGn
> + - valid values for n are 1 to 8.
> + - SWITCH_REGn
> + - valid values for n are 1 to 2
> +
> +Standard regulator bindings are used inside regulator subnodes. Check
> + Documentation/devicetree/bindings/regulator/regulator.txt
> +for more details
> +
> +Example:
> + rk808: pmic@1b {
> + compatible = "rockchip,rk808";
> + clock-output-names = "xin32k", "rk808-clkout2";
> + interrupt-parent = <&gpio0>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int>;
> + reg = <0x1b>;
> + rockchip,system-power-controller;
> + wakeup-source;
> + #clock-cells = <1>;
> +
> + vcc8-supply = <&vcc_18>;
> + vcc9-supply = <&vcc_io>;
> + vcc10-supply = <&vcc_io>;
> + vcc12-supply = <&vcc_io>;
> + vddio-supply = <&vccio_pmu>;
Technically the "-supply" section shouldn't be here. I plan to add
support for input supplies once you've landed your series. See
<https://chromium-review.googlesource.com/#/c/214596/> for a preview.
Just leave the "-supply" section out for now.
Other than that, this looks great.
Reviewed-by: Doug Anderson <diand...@chromium.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
