Commit-ID: 196cf358422517b3ff3779c46a1f3e26fb084172 Gitweb: http://git.kernel.org/tip/196cf358422517b3ff3779c46a1f3e26fb084172 Author: Ingo Molnar <[email protected]> AuthorDate: Sat, 6 Sep 2014 10:12:19 +0200 Committer: Ingo Molnar <[email protected]> CommitDate: Sat, 6 Sep 2014 10:20:55 +0200
x86/tty/serial/8250: Clean up the asm/serial.h include file a bit - correct spelling - align fields vertically to make things more readable - make the layout of magic defines more obvious Cc: Mark Rustad <[email protected]> Cc: Jeff Kirsher <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> --- arch/x86/include/asm/serial.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/include/asm/serial.h b/arch/x86/include/asm/serial.h index 03ece8e..460b84f 100644 --- a/arch/x86/include/asm/serial.h +++ b/arch/x86/include/asm/serial.h @@ -6,24 +6,24 @@ * * It'd be nice if someone built a serial card with a 24.576 MHz * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. + * megabits/second; but this requires a faster clock. */ -#define BASE_BAUD ( 1843200 / 16 ) +#define BASE_BAUD (1843200/16) /* Standard COM flags (except for COM4, because of the 8514 problem) */ #ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +# define STD_COMX_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +# define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | 0 | ASYNC_AUTO_IRQ) #else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +# define STD_COMX_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | 0 ) +# define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | 0 | 0 ) #endif -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { .uart = 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ - { .uart = 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ - { .uart = 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ - { .uart = 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { .uart = 0, BASE_BAUD, 0x3F8, 4, STD_COMX_FLAGS }, /* ttyS0 */ \ + { .uart = 0, BASE_BAUD, 0x2F8, 3, STD_COMX_FLAGS }, /* ttyS1 */ \ + { .uart = 0, BASE_BAUD, 0x3E8, 4, STD_COMX_FLAGS }, /* ttyS2 */ \ + { .uart = 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ #endif /* _ASM_X86_SERIAL_H */ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
