On 2005-03-26, at 16:19, Arjan van de Ven wrote:
`hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC
BadCRC is 99% sure a cabling issue; either a bad/overheated cable or a cable used at too high a speed for the cable.
No. It is more likely that the timing programming between the disk and host controller
are in a miss-match state. UDMA mode detection can come in to mind too.
It makes sense to experiment with hdparm to see if the problem goes away in non
Ultra DMA modes.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
