On Sep 22, 2014, at 6:25 PM, Bjorn Andersson <bjorn.anders...@sonymobile.com>
wrote:
> Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> 8960 and 8064 based devices. The binding currently describes the rpm
> itself and the regulator subnodes.
>
> Signed-off-by: Bjorn Andersson <bjorn.anders...@sonymobile.com>
> ---
> Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 246 ++++++++++++++++++++
> include/dt-bindings/mfd/qcom-rpm.h | 154 ++++++++++++
> 2 files changed, 400 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> create mode 100644 include/dt-bindings/mfd/qcom-rpm.h
>
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> new file mode 100644
> index 0000000..4264021
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> @@ -0,0 +1,246 @@
> +Qualcomm Resource Power Manager (RPM)
> +
> +This driver is used to interface with the Resource Power Manager (RPM) found
> in
> +various Qualcomm platforms. The RPM allows each component in the system to
> vote
> +for state of the system resources, such as clocks, regulators and bus
> +frequencies.
> +
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: must be one of:
> + "qcom,rpm-apq8064"
> + "qcom,rpm-msm8660"
> + "qcom,rpm-msm8960"
> +
> +- reg:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: base address and size of the RPM's message ram
> +
> +- interrupts:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: three entries specifying the RPM's:
> + 1. acknowledgement interrupt
> + 2. error interrupt
> + 3. wakeup interrupt
> +
> +- interrupt-names:
> + Usage: required
> + Value type: <string-array>
> + Definition: must be the three strings "ack", "err" and "wakeup", in
> order
> +
> +- #address-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 1
> +
> +- #size-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 0
> +
> +- qcom,ipc:
> + Usage: required
> + Value type: <prop-encoded-array>
> +
> + Definition: three entries specifying the outgoing ipc bit used for
> + signaling the RPM:
> + - phandle to a syscon node representing the apcs registers
> + - u32 representing offset to the register within the syscon
> + - u32 representing the ipc bit within the register
> +
Does this really ever differ for the SoCs, and even if it does why do we need
to encode it in DT. Can’t we determine it via the compatible setting?
> +
> += SUBDEVICES
These should be split out into their own specs/patches.
> +
> +The RPM exposes resources to its subnodes. The below bindings specify the set
> +of valid subnodes that can operate on these resources.
> +
> +== Switch-mode Power Supply regulator
> +
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: must be one of:
> + "qcom,rpm-pm8058-smps"
> + "qcom,rpm-pm8901-ftsmps"
> + "qcom,rpm-pm8921-smps"
> + "qcom,rpm-pm8921-ftsmps"
> +
> +- reg:
> + Usage: required
> + Value type: <u32>
> + Definition: resource as defined in <dt-bindings/mfd/qcom-rpm.h>
> + must be one of:
> + QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4,
> + QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2,
> + QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4,
> + QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8
> +
> +- bias-pull-down:
> + Usage: optional
> + Value type: <empty>
> + Definition: enable pull down of the regulator when inactive
> +
> +- qcom,switch-mode-frequency:
> + Usage: required
> + Value type: <u32>
> + Definition: Frequency (Hz) of the switch-mode power supply;
> + must be one of:
> + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
> + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
> + 1480000, 1370000, 1280000, 1200000
> +
> +- qcom,force-mode:
> + Usage: optional (default if no other qcom,force-mode is specified)
> + Value type: <u32>
> + Defintion: indicates that the regulator should be forced to a
> + particular mode, valid values are:
> + QCOM_RPM_FORCE_MODE_NONE - do not force any mode
> + QCOM_RPM_FORCE_MODE_LPM - force into low power mode
> + QCOM_RPM_FORCE_MODE_HPM - force into high power mode
> + QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically
> + select its own mode based on
> + realtime current draw, only for:
> + qcom,rpm-pm8921-smps,
> + qcom,rpm-pm8921-ftsmps
> +
> +- qcom,power-mode-hysteretic:
> + Usage: optional
> + Value type: <empty>
> + Definition: select that the power supply should operate in hysteretic
> + mode, instead of the default pwm mode
> +
> +Standard regulator bindings are used inside switch mode power supply
> subnodes.
> +Check Documentation/devicetree/bindings/regulator/regulator.txt for more
> +details.
> +
> +== Low-dropout regulator
> +
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: must be one of:
> + "qcom,rpm-pm8058-pldo"
> + "qcom,rpm-pm8058-nldo"
> + "qcom,rpm-pm8901-pldo"
> + "qcom,rpm-pm8901-nldo"
> + "qcom,rpm-pm8921-pldo"
> + "qcom,rpm-pm8921-nldo"
> + "qcom,rpm-pm8921-nldo1200"
> +
> +- reg:
> + Usage: required
> + Value type: <u32>
> + Definition: resource as defined in <dt-bindings/mfd/qcom-rpm.h>
> + must be one of:
> + QCOM_RPM_PM8058_LDO0 - QCOM_RPM_PM8058_LDO25,
> + QCOM_RPM_PM8821_LDO1,
> + QCOM_RPM_PM8901_LDO0 - QCOM_RPM_PM8901_LDO6,
> + QCOM_RPM_PM8921_LDO1 - QCOM_RPM_PM8921_LDO29
> +
> +- bias-pull-down:
> + Usage: optional
> + Value type: <empty>
> + Definition: enable pull down of the regulator when inactive
> +
> +- qcom,force-mode:
> + Usage: optional
> + Value type: <u32>
> + Defintion: indicates that the regulator should not be forced to any
> + particular mode, valid values are:
> + QCOM_RPM_FORCE_MODE_NONE - do not force any mode
> + QCOM_RPM_FORCE_MODE_LPM - force into low power mode
> + QCOM_RPM_FORCE_MODE_HPM - force into high power mode
> + QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass
> + mode, i.e. to act as a switch
> + and not regulate, only for:
> + qcom,rpm-pm8921-pldo,
> + qcom,rpm-pm8921-nldo,
> + qcom,rpm-pm8921-nldo1200
> +
> +Standard regulator bindings are used inside switch low-dropout regulator
> +subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt
> for
> +more details.
> +
> +== Negative Charge Pump
> +
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: must be one of:
> + "qcom,rpm-pm8058-ncp"
> + "qcom,rpm-pm8921-ncp"
> +
> +- reg:
> + Usage: required
> + Value type: <u32>
> + Definition: resource as defined in <dt-bindings/mfd/qcom-rpm.h>
> + must be one of:
> + QCOM_RPM_PM8058_NCP,
> + QCOM_RPM_PM8921_NCP
> +
> +- qcom,switch-mode-frequency:
> + Usage: required
> + Value type: <u32>
> + Definition: Frequency (Hz) of the swith mode power supply;
> + must be one of:
> + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
> + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
> + 1480000, 1370000, 1280000, 1200000
> +
> +Standard regulator bindings are used inside negative charge pump regulator
> +subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt
> for
> +more details.
> +
> +== Switch
> +
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: must be one of:
> + "qcom,rpm-pm8058-switch"
> + "qcom,rpm-pm8901-switch"
> + "qcom,rpm-pm8921-switch"
> +
> +- reg:
> + Usage: required
> + Value type: <u32>
> + Definition: resource as defined in <dt-bindings/mfd/qcom/qcom-rpm.h>
> + must be one of:
> + QCOM_RPM_PM8058_LVS0 - QCOM_RPM_PM8058_LVS1,
> + QCOM_RPM_PM8901_LVS0 - QCOM_RPM_PM8901_LVS3,
> + QCOM_RPM_PM8901_MVS,
> + QCOM_RPM_PM8921_LVS1 - QCOM_RPM_PM8921_LVS7,
> + QCOM_RPM_PM8921_MVS
> +
> += EXAMPLE
> +
> + #include <dt-bindings/mfd/qcom-rpm.h>
> +
> + rpm@108000 {
> + compatible = "qcom,rpm-msm8960";
> + reg = <0x108000 0x1000>;
> + qcom,ipc = <&apcs 0x8 2>;
> +
> + interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
> + interrupt-names = "ack", "err", "wakeup";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm8921_smps1: pm8921-smps1 {
> + compatible = "qcom,rpm-pm8921-smps";
> + reg = <QCOM_RPM_PM8921_SMPS1>;
> +
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + regulator-always-on;
> +
> + bias-pull-down;
> +
> + qcom,switch-mode-frequency = <3200000>;
> + };
> + };
> +
> diff --git a/include/dt-bindings/mfd/qcom-rpm.h
> b/include/dt-bindings/mfd/qcom-rpm.h
> new file mode 100644
> index 0000000..388a6f3
> --- /dev/null
> +++ b/include/dt-bindings/mfd/qcom-rpm.h
> @@ -0,0 +1,154 @@
> +/*
> + * This header provides constants for the Qualcomm RPM bindings.
> + */
> +
> +#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
> +#define _DT_BINDINGS_MFD_QCOM_RPM_H
> +
> +/*
> + * Constants use to identify individual resources in the RPM.
> + */
> +#define QCOM_RPM_APPS_FABRIC_ARB 1
> +#define QCOM_RPM_APPS_FABRIC_CLK 2
> +#define QCOM_RPM_APPS_FABRIC_HALT 3
> +#define QCOM_RPM_APPS_FABRIC_IOCTL 4
> +#define QCOM_RPM_APPS_FABRIC_MODE 5
> +#define QCOM_RPM_APPS_L2_CACHE_CTL 6
> +#define QCOM_RPM_CFPB_CLK 7
> +#define QCOM_RPM_CXO_BUFFERS 8
> +#define QCOM_RPM_CXO_CLK 9
> +#define QCOM_RPM_DAYTONA_FABRIC_CLK 10
> +#define QCOM_RPM_DDR_DMM 11
> +#define QCOM_RPM_EBI1_CLK 12
> +#define QCOM_RPM_HDMI_SWITCH 13
> +#define QCOM_RPM_MMFPB_CLK 14
> +#define QCOM_RPM_MM_FABRIC_ARB 15
> +#define QCOM_RPM_MM_FABRIC_CLK 16
> +#define QCOM_RPM_MM_FABRIC_HALT 17
> +#define QCOM_RPM_MM_FABRIC_IOCTL 18
> +#define QCOM_RPM_MM_FABRIC_MODE 19
> +#define QCOM_RPM_PLL_4 20
> +#define QCOM_RPM_PM8058_LDO0 21
> +#define QCOM_RPM_PM8058_LDO1 22
> +#define QCOM_RPM_PM8058_LDO2 23
> +#define QCOM_RPM_PM8058_LDO3 24
> +#define QCOM_RPM_PM8058_LDO4 25
> +#define QCOM_RPM_PM8058_LDO5 26
> +#define QCOM_RPM_PM8058_LDO6 27
> +#define QCOM_RPM_PM8058_LDO7 28
> +#define QCOM_RPM_PM8058_LDO8 29
> +#define QCOM_RPM_PM8058_LDO9 30
> +#define QCOM_RPM_PM8058_LDO10 31
> +#define QCOM_RPM_PM8058_LDO11 32
> +#define QCOM_RPM_PM8058_LDO12 33
> +#define QCOM_RPM_PM8058_LDO13 34
> +#define QCOM_RPM_PM8058_LDO14 35
> +#define QCOM_RPM_PM8058_LDO15 36
> +#define QCOM_RPM_PM8058_LDO16 37
> +#define QCOM_RPM_PM8058_LDO17 38
> +#define QCOM_RPM_PM8058_LDO18 39
> +#define QCOM_RPM_PM8058_LDO19 40
> +#define QCOM_RPM_PM8058_LDO20 41
> +#define QCOM_RPM_PM8058_LDO21 42
> +#define QCOM_RPM_PM8058_LDO22 43
> +#define QCOM_RPM_PM8058_LDO23 44
> +#define QCOM_RPM_PM8058_LDO24 45
> +#define QCOM_RPM_PM8058_LDO25 46
> +#define QCOM_RPM_PM8058_LVS0 47
> +#define QCOM_RPM_PM8058_LVS1 48
> +#define QCOM_RPM_PM8058_NCP 49
> +#define QCOM_RPM_PM8058_SMPS0 50
> +#define QCOM_RPM_PM8058_SMPS1 51
> +#define QCOM_RPM_PM8058_SMPS2 52
> +#define QCOM_RPM_PM8058_SMPS3 53
> +#define QCOM_RPM_PM8058_SMPS4 54
> +#define QCOM_RPM_PM8821_LDO1 55
> +#define QCOM_RPM_PM8821_SMPS1 56
> +#define QCOM_RPM_PM8821_SMPS2 57
> +#define QCOM_RPM_PM8901_LDO0 58
> +#define QCOM_RPM_PM8901_LDO1 59
> +#define QCOM_RPM_PM8901_LDO2 60
> +#define QCOM_RPM_PM8901_LDO3 61
> +#define QCOM_RPM_PM8901_LDO4 62
> +#define QCOM_RPM_PM8901_LDO5 63
> +#define QCOM_RPM_PM8901_LDO6 64
> +#define QCOM_RPM_PM8901_LVS0 65
> +#define QCOM_RPM_PM8901_LVS1 66
> +#define QCOM_RPM_PM8901_LVS2 67
> +#define QCOM_RPM_PM8901_LVS3 68
> +#define QCOM_RPM_PM8901_MVS 69
> +#define QCOM_RPM_PM8901_SMPS0 70
> +#define QCOM_RPM_PM8901_SMPS1 71
> +#define QCOM_RPM_PM8901_SMPS2 72
> +#define QCOM_RPM_PM8901_SMPS3 73
> +#define QCOM_RPM_PM8901_SMPS4 74
> +#define QCOM_RPM_PM8921_CLK1 75
> +#define QCOM_RPM_PM8921_CLK2 76
> +#define QCOM_RPM_PM8921_LDO1 77
> +#define QCOM_RPM_PM8921_LDO2 78
> +#define QCOM_RPM_PM8921_LDO3 79
> +#define QCOM_RPM_PM8921_LDO4 80
> +#define QCOM_RPM_PM8921_LDO5 81
> +#define QCOM_RPM_PM8921_LDO6 82
> +#define QCOM_RPM_PM8921_LDO7 83
> +#define QCOM_RPM_PM8921_LDO8 84
> +#define QCOM_RPM_PM8921_LDO9 85
> +#define QCOM_RPM_PM8921_LDO10 86
> +#define QCOM_RPM_PM8921_LDO11 87
> +#define QCOM_RPM_PM8921_LDO12 88
> +#define QCOM_RPM_PM8921_LDO13 89
> +#define QCOM_RPM_PM8921_LDO14 90
> +#define QCOM_RPM_PM8921_LDO15 91
> +#define QCOM_RPM_PM8921_LDO16 92
> +#define QCOM_RPM_PM8921_LDO17 93
> +#define QCOM_RPM_PM8921_LDO18 94
> +#define QCOM_RPM_PM8921_LDO19 95
> +#define QCOM_RPM_PM8921_LDO20 96
> +#define QCOM_RPM_PM8921_LDO21 97
> +#define QCOM_RPM_PM8921_LDO22 98
> +#define QCOM_RPM_PM8921_LDO23 99
> +#define QCOM_RPM_PM8921_LDO24 100
> +#define QCOM_RPM_PM8921_LDO25 101
> +#define QCOM_RPM_PM8921_LDO26 102
> +#define QCOM_RPM_PM8921_LDO27 103
> +#define QCOM_RPM_PM8921_LDO28 104
> +#define QCOM_RPM_PM8921_LDO29 105
> +#define QCOM_RPM_PM8921_LVS1 106
> +#define QCOM_RPM_PM8921_LVS2 107
> +#define QCOM_RPM_PM8921_LVS3 108
> +#define QCOM_RPM_PM8921_LVS4 109
> +#define QCOM_RPM_PM8921_LVS5 110
> +#define QCOM_RPM_PM8921_LVS6 111
> +#define QCOM_RPM_PM8921_LVS7 112
> +#define QCOM_RPM_PM8921_MVS 113
> +#define QCOM_RPM_PM8921_NCP 114
> +#define QCOM_RPM_PM8921_SMPS1 115
> +#define QCOM_RPM_PM8921_SMPS2 116
> +#define QCOM_RPM_PM8921_SMPS3 117
> +#define QCOM_RPM_PM8921_SMPS4 118
> +#define QCOM_RPM_PM8921_SMPS5 119
> +#define QCOM_RPM_PM8921_SMPS6 120
> +#define QCOM_RPM_PM8921_SMPS7 121
> +#define QCOM_RPM_PM8921_SMPS8 122
> +#define QCOM_RPM_PXO_CLK 123
> +#define QCOM_RPM_QDSS_CLK 124
> +#define QCOM_RPM_SFPB_CLK 125
> +#define QCOM_RPM_SMI_CLK 126
> +#define QCOM_RPM_SYS_FABRIC_ARB 127
> +#define QCOM_RPM_SYS_FABRIC_CLK 128
> +#define QCOM_RPM_SYS_FABRIC_HALT 129
> +#define QCOM_RPM_SYS_FABRIC_IOCTL 130
> +#define QCOM_RPM_SYS_FABRIC_MODE 131
> +#define QCOM_RPM_USB_OTG_SWITCH 132
> +#define QCOM_RPM_VDDMIN_GPIO 133
> +
> +/*
> + * Constants used to select force mode for regulators.
> + */
> +#define QCOM_RPM_FORCE_MODE_NONE 0
> +#define QCOM_RPM_FORCE_MODE_LPM 1
> +#define QCOM_RPM_FORCE_MODE_HPM 2
> +#define QCOM_RPM_FORCE_MODE_AUTO 3
> +#define QCOM_RPM_FORCE_MODE_BYPASS 4
> +
> +#endif
> --
> 1.7.9.5
>
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by
The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
