On Thu, Oct 02, 2014 at 01:37:48PM -0500, [email protected] wrote:
> From: Alan Tull <[email protected]>
>
> Add device tree bindings documentation for ltc2978.
>
> Signed-off-by: Alan Tull <[email protected]>
> ---
> v2: clean whitespace
> ---
> .../devicetree/bindings/hwmon/ltc2978.txt | 41
> ++++++++++++++++++++
> 1 file changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> new file mode 100644
> index 0000000..b2d9c4d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> @@ -0,0 +1,41 @@
> +ltc2978
> +
> +Required properties:
> + - compatible: one of: ltc2974, ltc2977, ltc2978, ltc3880, ltc3883, ltm4676
> + - reg: I2C address
> +
> +Optional properties:
> + Name of the optional regulator subnode must be "regulators".
This is currently a problem. The regulator core trats it as mandatory,
meaning I get error messages such as
ltc2978 5-005e: Failed to find regulator container node
if not specified. We'll have to sort out with the regulator core how this should
be handled.
> + - #address-cells must be 1.
> + - #size-cells must be 0.
> +
Checking this out, those do not seem to be necessary.
> + For each regulator:
> + - reg: regulator number
This does not seem to be necessary either.
> + - regulator-compatible: must be vout_en<regulator number> such as vout_en3
> + valid range is:
> + ltc2977, ltc2978 : vout_en0 - vout_en7
> + ltc2974 : vout_en0 - vout_en3
> + ltc3880, ltm4676 : vout_en0 - vout_en1
> + ltc3883 : vout_en0 only
Besides the unnecessary _en, this is a problem if there is more than one
supported chip in the system, if DEBUG_FS is enabled, and if names are not
specified in the devicetree file. I get a lot of error messages in a
system with a large number of LTC2978 chips.
vout3: Failed to create debugfs directory
vout4: Failed to create debugfs directory
vout5: Failed to create debugfs directory
vout6: Failed to create debugfs directory
vout7: Failed to create debugfs directory
vout2: Failed to create debugfs directory
vout3: Failed to create debugfs directory
and so on (40+ times in my system). We will have to find a solution for this
problem.
I also get
vout7: no parameters
for each regulator which is a bit annoying with 50+ of those regulators
in the system.
Guenter
> + - regulator-name: arbitrary name for regulator
> +
> +Example:
> +ltc2978@5e {
> + compatible = "ltc2978";
> + reg = <0x5e>;
> + regulators {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vdacp0_reg: regulator@0 {
> + reg = <0>;
> + regulator-compatible = "vout_en0";
> + regulator-name = "FPGA-2.5V";
> + };
> + vdacp2_reg: regulator@2 {
> + reg = <2>;
> + regulator-compatible = "vout_en2";
> + regulator-name = "FPGA-1.5V";
> + };
> + };
> +};
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
