diff --git a/Makefile b/Makefile
index 03bd927522f7..9df630a513b7 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 10
-SUBLEVEL = 56
+SUBLEVEL = 57
EXTRAVERSION =
NAME = TOSSUG Baby Fish
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 9e3f441e7e84..9c37f3d896a2 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -514,6 +514,12 @@ void conn_try_outdate_peer_async(struct drbd_tconn *tconn)
struct task_struct *opa;
kref_get(&tconn->kref);
+ /* We may just have force_sig()'ed this thread
+ * to get it out of some blocking network function.
+ * Clear signals; otherwise kthread_run(), which internally uses
+ * wait_on_completion_killable(), will mistake our pending signal
+ * for a new fatal signal and fail. */
+ flush_signals(current);
opa = kthread_run(_try_outdate_peer_async, tconn, "drbd_async_h");
if (IS_ERR(opa)) {
conn_err(tconn, "out of mem, failed to invoke fence-peer
helper\n");
diff --git a/drivers/cpufreq/cpufreq_governor.c
b/drivers/cpufreq/cpufreq_governor.c
index 28a0b32c73b3..27b0e2a295ea 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -97,7 +97,7 @@ void dbs_check_cpu(struct dbs_data *dbs_data, int cpu)
policy = cdbs->cur_policy;
- /* Get Absolute Load (in terms of freq for ondemand gov) */
+ /* Get Absolute Load */
for_each_cpu(j, policy->cpus) {
struct cpu_dbs_common_info *j_cdbs;
u64 cur_wall_time, cur_idle_time;
@@ -148,14 +148,6 @@ void dbs_check_cpu(struct dbs_data *dbs_data, int cpu)
load = 100 * (wall_time - idle_time) / wall_time;
- if (dbs_data->cdata->governor == GOV_ONDEMAND) {
- int freq_avg = __cpufreq_driver_getavg(policy, j);
- if (freq_avg <= 0)
- freq_avg = policy->cur;
-
- load *= freq_avg;
- }
-
if (load > max_load)
max_load = load;
}
diff --git a/drivers/cpufreq/cpufreq_governor.h
b/drivers/cpufreq/cpufreq_governor.h
index 0d9e6befe1d5..4a9058aeb57e 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -169,7 +169,6 @@ struct od_dbs_tuners {
unsigned int sampling_rate;
unsigned int sampling_down_factor;
unsigned int up_threshold;
- unsigned int adj_up_threshold;
unsigned int powersave_bias;
unsigned int io_is_busy;
};
diff --git a/drivers/cpufreq/cpufreq_ondemand.c
b/drivers/cpufreq/cpufreq_ondemand.c
index c087347d6688..25438bbf96bb 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -29,11 +29,9 @@
#include "cpufreq_governor.h"
/* On-demand governor macros */
-#define DEF_FREQUENCY_DOWN_DIFFERENTIAL (10)
#define DEF_FREQUENCY_UP_THRESHOLD (80)
#define DEF_SAMPLING_DOWN_FACTOR (1)
#define MAX_SAMPLING_DOWN_FACTOR (100000)
-#define MICRO_FREQUENCY_DOWN_DIFFERENTIAL (3)
#define MICRO_FREQUENCY_UP_THRESHOLD (95)
#define MICRO_FREQUENCY_MIN_SAMPLE_RATE (10000)
#define MIN_FREQUENCY_UP_THRESHOLD (11)
@@ -161,14 +159,10 @@ static void dbs_freq_increase(struct cpufreq_policy *p,
unsigned int freq)
/*
* Every sampling_rate, we check, if current idle time is less than 20%
- * (default), then we try to increase frequency. Every sampling_rate, we look
- * for the lowest frequency which can sustain the load while keeping idle time
- * over 30%. If such a frequency exist, we try to decrease to this frequency.
- *
- * Any frequency increase takes it to the maximum frequency. Frequency
reduction
- * happens at minimum steps of 5% (default) of current frequency
+ * (default), then we try to increase frequency. Else, we adjust the frequency
+ * proportional to load.
*/
-static void od_check_cpu(int cpu, unsigned int load_freq)
+static void od_check_cpu(int cpu, unsigned int load)
{
struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy;
@@ -178,29 +172,17 @@ static void od_check_cpu(int cpu, unsigned int load_freq)
dbs_info->freq_lo = 0;
/* Check for frequency increase */
- if (load_freq > od_tuners->up_threshold * policy->cur) {
+ if (load > od_tuners->up_threshold) {
/* If switching to max speed, apply sampling_down_factor */
if (policy->cur < policy->max)
dbs_info->rate_mult =
od_tuners->sampling_down_factor;
dbs_freq_increase(policy, policy->max);
return;
- }
-
- /* Check for frequency decrease */
- /* if we cannot reduce the frequency anymore, break out early */
- if (policy->cur == policy->min)
- return;
-
- /*
- * The optimal frequency is the frequency that is the lowest that can
- * support the current CPU usage without triggering the up policy. To be
- * safe, we focus 10 points under the threshold.
- */
- if (load_freq < od_tuners->adj_up_threshold
- * policy->cur) {
+ } else {
+ /* Calculate the next frequency proportional to load */
unsigned int freq_next;
- freq_next = load_freq / od_tuners->adj_up_threshold;
+ freq_next = load * policy->cpuinfo.max_freq / 100;
/* No longer fully busy, reset rate_mult */
dbs_info->rate_mult = 1;
@@ -374,9 +356,6 @@ static ssize_t store_up_threshold(struct dbs_data
*dbs_data, const char *buf,
input < MIN_FREQUENCY_UP_THRESHOLD) {
return -EINVAL;
}
- /* Calculate the new adj_up_threshold */
- od_tuners->adj_up_threshold += input;
- od_tuners->adj_up_threshold -= od_tuners->up_threshold;
od_tuners->up_threshold = input;
return count;
@@ -525,8 +504,6 @@ static int od_init(struct dbs_data *dbs_data)
if (idle_time != -1ULL) {
/* Idle micro accounting is supported. Use finer thresholds */
tuners->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
- tuners->adj_up_threshold = MICRO_FREQUENCY_UP_THRESHOLD -
- MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
/*
* In nohz/micro accounting case we set the minimum frequency
* not depending on HZ, but fixed (very low). The deferred
@@ -535,8 +512,6 @@ static int od_init(struct dbs_data *dbs_data)
dbs_data->min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
} else {
tuners->up_threshold = DEF_FREQUENCY_UP_THRESHOLD;
- tuners->adj_up_threshold = DEF_FREQUENCY_UP_THRESHOLD -
- DEF_FREQUENCY_DOWN_DIFFERENTIAL;
/* For correct statistics, we need 10 ticks for each measure */
dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index bfd6273fd873..7fb600239059 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -81,7 +81,7 @@ static ssize_t show_time_in_state(struct cpufreq_policy
*policy, char *buf)
for (i = 0; i < stat->state_num; i++) {
len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i],
(unsigned long long)
- cputime64_to_clock_t(stat->time_in_state[i]));
+ jiffies_64_to_clock_t(stat->time_in_state[i]));
}
return len;
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 774f81423d78..2332b5ced0dd 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -60,6 +60,10 @@
#include "raid0.h"
#include "bitmap.h"
+static bool devices_handle_discard_safely = false;
+module_param(devices_handle_discard_safely, bool, 0644);
+MODULE_PARM_DESC(devices_handle_discard_safely,
+ "Set to Y if all devices in each array reliably return zeroes
on reads from discarded regions");
/*
* Stripe cache
*/
@@ -5611,7 +5615,7 @@ static int run(struct mddev *mddev)
mddev->queue->limits.discard_granularity = stripe;
/*
* unaligned part of discard request will be ignored, so can't
- * guarantee discard_zerors_data
+ * guarantee discard_zeroes_data
*/
mddev->queue->limits.discard_zeroes_data = 0;
@@ -5636,6 +5640,18 @@ static int run(struct mddev *mddev)
!bdev_get_queue(rdev->bdev)->
limits.discard_zeroes_data)
discard_supported = false;
+ /* Unfortunately, discard_zeroes_data is not currently
+ * a guarantee - just a hint. So we only allow DISCARD
+ * if the sysadmin has confirmed that only safe devices
+ * are in use by setting a module parameter.
+ */
+ if (!devices_handle_discard_safely) {
+ if (discard_supported) {
+ pr_info("md/raid456: discard support
disabled due to uncertainty.\n");
+ pr_info("Set
raid456.devices_handle_discard_safely=Y to override.\n");
+ }
+ discard_supported = false;
+ }
}
if (discard_supported &&
diff --git a/drivers/media/v4l2-core/videobuf2-core.c
b/drivers/media/v4l2-core/videobuf2-core.c
index e3bdc3be91e1..5e47ba479e53 100644
--- a/drivers/media/v4l2-core/videobuf2-core.c
+++ b/drivers/media/v4l2-core/videobuf2-core.c
@@ -666,6 +666,7 @@ static int __reqbufs(struct vb2_queue *q, struct
v4l2_requestbuffers *req)
* to the userspace.
*/
req->count = allocated_buffers;
+ q->waiting_for_buffers = !V4L2_TYPE_IS_OUTPUT(q->type);
return 0;
}
@@ -714,6 +715,7 @@ static int __create_bufs(struct vb2_queue *q, struct
v4l2_create_buffers *create
memset(q->plane_sizes, 0, sizeof(q->plane_sizes));
memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx));
q->memory = create->memory;
+ q->waiting_for_buffers = !V4L2_TYPE_IS_OUTPUT(q->type);
}
num_buffers = min(create->count, VIDEO_MAX_FRAME - q->num_buffers);
@@ -1355,6 +1357,7 @@ int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b)
* dequeued in dqbuf.
*/
list_add_tail(&vb->queued_entry, &q->queued_list);
+ q->waiting_for_buffers = false;
vb->state = VB2_BUF_STATE_QUEUED;
/*
@@ -1724,6 +1727,7 @@ int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type
type)
* and videobuf, effectively returning control over them to userspace.
*/
__vb2_queue_cancel(q);
+ q->waiting_for_buffers = !V4L2_TYPE_IS_OUTPUT(q->type);
dprintk(3, "Streamoff successful\n");
return 0;
@@ -2009,9 +2013,16 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file
*file, poll_table *wait)
}
/*
- * There is nothing to wait for if no buffers have already been queued.
+ * There is nothing to wait for if the queue isn't streaming.
*/
- if (list_empty(&q->queued_list))
+ if (!vb2_is_streaming(q))
+ return res | POLLERR;
+ /*
+ * For compatibility with vb1: if QBUF hasn't been called yet, then
+ * return POLLERR as well. This only affects capture queues, output
+ * queues will always initialize waiting_for_buffers to false.
+ */
+ if (q->waiting_for_buffers)
return res | POLLERR;
if (list_empty(&q->done_list))
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index b6d15d349810..aa023283cc8a 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -1270,13 +1270,22 @@ update_time:
return 0;
}
+/*
+ * Maximum length of linked list formed by ICB hierarchy. The chosen number is
+ * arbitrary - just that we hopefully don't limit any real use of rewritten
+ * inode on write-once media but avoid looping for too long on corrupted media.
+ */
+#define UDF_MAX_ICB_NESTING 1024
+
static void __udf_read_inode(struct inode *inode)
{
struct buffer_head *bh = NULL;
struct fileEntry *fe;
uint16_t ident;
struct udf_inode_info *iinfo = UDF_I(inode);
+ unsigned int indirections = 0;
+reread:
/*
* Set defaults, but the inode is still incomplete!
* Note: get_new_inode() sets the following on a new inode:
@@ -1313,28 +1322,26 @@ static void __udf_read_inode(struct inode *inode)
ibh = udf_read_ptagged(inode->i_sb, &iinfo->i_location, 1,
&ident);
if (ident == TAG_IDENT_IE && ibh) {
- struct buffer_head *nbh = NULL;
struct kernel_lb_addr loc;
struct indirectEntry *ie;
ie = (struct indirectEntry *)ibh->b_data;
loc = lelb_to_cpu(ie->indirectICB.extLocation);
- if (ie->indirectICB.extLength &&
- (nbh = udf_read_ptagged(inode->i_sb, &loc, 0,
- &ident))) {
- if (ident == TAG_IDENT_FE ||
- ident == TAG_IDENT_EFE) {
- memcpy(&iinfo->i_location,
- &loc,
- sizeof(struct kernel_lb_addr));
- brelse(bh);
- brelse(ibh);
- brelse(nbh);
- __udf_read_inode(inode);
+ if (ie->indirectICB.extLength) {
+ brelse(bh);
+ brelse(ibh);
+ memcpy(&iinfo->i_location, &loc,
+ sizeof(struct kernel_lb_addr));
+ if (++indirections > UDF_MAX_ICB_NESTING) {
+ udf_err(inode->i_sb,
+ "too many ICBs in ICB hierarchy"
+ " (max %d supported)\n",
+ UDF_MAX_ICB_NESTING);
+ make_bad_inode(inode);
return;
}
- brelse(nbh);
+ goto reread;
}
}
brelse(ibh);
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 7b5d4a8ab199..c039fe1315eb 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -254,23 +254,11 @@ extern unsigned long preset_lpj;
#define SEC_JIFFIE_SC (32 - SHIFT_HZ)
#endif
#define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
-#define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
#define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC)
+\
TICK_NSEC -1) / (u64)TICK_NSEC))
#define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
TICK_NSEC -1) / (u64)TICK_NSEC))
-#define USEC_CONVERSION \
- ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
- TICK_NSEC -1) / (u64)TICK_NSEC))
-/*
- * USEC_ROUND is used in the timeval to jiffie conversion. See there
- * for more details. It is the scaled resolution rounding value. Note
- * that it is a 64-bit value. Since, when it is applied, we are already
- * in jiffies (albit scaled), it is nothing but the bits we will shift
- * off.
- */
-#define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
/*
* The maximum jiffie value is (MAX_INT >> 1). Here we translate that
* into seconds. The 64-bit case will overflow if we are not careful,
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index d88a098d1aff..2cc4e0df9c5d 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -318,6 +318,9 @@ struct v4l2_fh;
* @done_wq: waitqueue for processes waiting for buffers ready to be dequeued
* @alloc_ctx: memory type/allocator-specific contexts for each plane
* @streaming: current streaming state
+ * @waiting_for_buffers: used in poll() to check if vb2 is still waiting for
+ * buffers. Only set for capture queues if qbuf has not yet been
+ * called since poll() needs to return POLLERR in that situation.
* @fileio: file io emulator internal data, used only if emulator is active
*/
struct vb2_queue {
@@ -350,6 +353,7 @@ struct vb2_queue {
unsigned int plane_sizes[VIDEO_MAX_PLANES];
unsigned int streaming:1;
+ unsigned int waiting_for_buffers:1;
struct vb2_fileio_data *fileio;
};
diff --git a/init/Kconfig b/init/Kconfig
index 5d6febaea56d..8fa4f758821a 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1367,6 +1367,7 @@ config FUTEX
config HAVE_FUTEX_CMPXCHG
bool
+ depends on FUTEX
help
Architectures should select this if futex_atomic_cmpxchg_inatomic()
is implemented and always working. This removes a couple of runtime
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 6bf387a60399..0b4733447151 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -7482,8 +7482,10 @@ int perf_event_init_task(struct task_struct *child)
for_each_task_context_nr(ctxn) {
ret = perf_event_init_context(child, ctxn);
- if (ret)
+ if (ret) {
+ perf_event_free_task(child);
return ret;
+ }
}
return 0;
diff --git a/kernel/fork.c b/kernel/fork.c
index 2c76e11ba939..514dbc40f98f 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1324,7 +1324,7 @@ static struct task_struct *copy_process(unsigned long
clone_flags,
goto bad_fork_cleanup_policy;
retval = audit_alloc(p);
if (retval)
- goto bad_fork_cleanup_policy;
+ goto bad_fork_cleanup_perf;
/* copy all the process information */
retval = copy_semundo(clone_flags, p);
if (retval)
@@ -1522,8 +1522,9 @@ bad_fork_cleanup_semundo:
exit_sem(p);
bad_fork_cleanup_audit:
audit_free(p);
-bad_fork_cleanup_policy:
+bad_fork_cleanup_perf:
perf_event_free_task(p);
+bad_fork_cleanup_policy:
#ifdef CONFIG_NUMA
mpol_put(p->mempolicy);
bad_fork_cleanup_cgroup:
diff --git a/kernel/time.c b/kernel/time.c
index d3617dbd3dca..d21398e6da87 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -496,17 +496,20 @@ EXPORT_SYMBOL(usecs_to_jiffies);
* that a remainder subtract here would not do the right thing as the
* resolution values don't fall on second boundries. I.e. the line:
* nsec -= nsec % TICK_NSEC; is NOT a correct resolution rounding.
+ * Note that due to the small error in the multiplier here, this
+ * rounding is incorrect for sufficiently large values of tv_nsec, but
+ * well formed timespecs should have tv_nsec < NSEC_PER_SEC, so we're
+ * OK.
*
* Rather, we just shift the bits off the right.
*
* The >> (NSEC_JIFFIE_SC - SEC_JIFFIE_SC) converts the scaled nsec
* value to a scaled second value.
*/
-unsigned long
-timespec_to_jiffies(const struct timespec *value)
+static unsigned long
+__timespec_to_jiffies(unsigned long sec, long nsec)
{
- unsigned long sec = value->tv_sec;
- long nsec = value->tv_nsec + TICK_NSEC - 1;
+ nsec = nsec + TICK_NSEC - 1;
if (sec >= MAX_SEC_IN_JIFFIES){
sec = MAX_SEC_IN_JIFFIES;
@@ -517,6 +520,13 @@ timespec_to_jiffies(const struct timespec *value)
(NSEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
}
+
+unsigned long
+timespec_to_jiffies(const struct timespec *value)
+{
+ return __timespec_to_jiffies(value->tv_sec, value->tv_nsec);
+}
+
EXPORT_SYMBOL(timespec_to_jiffies);
void
@@ -533,31 +543,27 @@ jiffies_to_timespec(const unsigned long jiffies, struct
timespec *value)
}
EXPORT_SYMBOL(jiffies_to_timespec);
-/* Same for "timeval"
+/*
+ * We could use a similar algorithm to timespec_to_jiffies (with a
+ * different multiplier for usec instead of nsec). But this has a
+ * problem with rounding: we can't exactly add TICK_NSEC - 1 to the
+ * usec value, since it's not necessarily integral.
*
- * Well, almost. The problem here is that the real system resolution is
- * in nanoseconds and the value being converted is in micro seconds.
- * Also for some machines (those that use HZ = 1024, in-particular),
- * there is a LARGE error in the tick size in microseconds.
-
- * The solution we use is to do the rounding AFTER we convert the
- * microsecond part. Thus the USEC_ROUND, the bits to be shifted off.
- * Instruction wise, this should cost only an additional add with carry
- * instruction above the way it was done above.
+ * We could instead round in the intermediate scaled representation
+ * (i.e. in units of 1/2^(large scale) jiffies) but that's also
+ * perilous: the scaling introduces a small positive error, which
+ * combined with a division-rounding-upward (i.e. adding 2^(scale) - 1
+ * units to the intermediate before shifting) leads to accidental
+ * overflow and overestimates.
+ *
+ * At the cost of one additional multiplication by a constant, just
+ * use the timespec implementation.
*/
unsigned long
timeval_to_jiffies(const struct timeval *value)
{
- unsigned long sec = value->tv_sec;
- long usec = value->tv_usec;
-
- if (sec >= MAX_SEC_IN_JIFFIES){
- sec = MAX_SEC_IN_JIFFIES;
- usec = 0;
- }
- return (((u64)sec * SEC_CONVERSION) +
- (((u64)usec * USEC_CONVERSION + USEC_ROUND) >>
- (USEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
+ return __timespec_to_jiffies(value->tv_sec,
+ value->tv_usec * NSEC_PER_USEC);
}
EXPORT_SYMBOL(timeval_to_jiffies);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 0bc181b0524c..3d9fee3a80b3 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -3371,7 +3371,7 @@ static void rb_iter_reset(struct ring_buffer_iter *iter)
iter->head = cpu_buffer->reader_page->read;
iter->cache_reader_page = iter->head_page;
- iter->cache_read = iter->head;
+ iter->cache_read = cpu_buffer->read;
if (iter->head)
iter->read_stamp = cpu_buffer->read_stamp;
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index eb00e81601a5..d21c9ef0943c 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1733,21 +1733,24 @@ static int __split_huge_page_map(struct page *page,
if (pmd) {
pgtable = pgtable_trans_huge_withdraw(mm);
pmd_populate(mm, &_pmd, pgtable);
+ if (pmd_write(*pmd))
+ BUG_ON(page_mapcount(page) != 1);
haddr = address;
for (i = 0; i < HPAGE_PMD_NR; i++, haddr += PAGE_SIZE) {
pte_t *pte, entry;
BUG_ON(PageCompound(page+i));
+ /*
+ * Note that pmd_numa is not transferred deliberately
+ * to avoid any possibility that pte_numa leaks to
+ * a PROT_NONE VMA by accident.
+ */
entry = mk_pte(page + i, vma->vm_page_prot);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
if (!pmd_write(*pmd))
entry = pte_wrprotect(entry);
- else
- BUG_ON(page_mapcount(page) != 1);
if (!pmd_young(*pmd))
entry = pte_mkold(entry);
- if (pmd_numa(*pmd))
- entry = pte_mknuma(entry);
pte = pte_offset_map(&_pmd, haddr);
BUG_ON(!pte_none(*pte));
set_pte_at(mm, haddr, pte, entry);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 448c034184e2..62aebed7c6e2 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -6568,6 +6568,9 @@ int cfg80211_testmode_reply(struct sk_buff *skb)
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
+ /* clear CB data for netlink core to own from now on */
+ memset(skb->cb, 0, sizeof(skb->cb));
+
if (WARN_ON(!rdev->testmode_info)) {
kfree_skb(skb);
return -EINVAL;
@@ -6594,6 +6597,9 @@ void cfg80211_testmode_event(struct sk_buff *skb, gfp_t
gfp)
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
+ /* clear CB data for netlink core to own from now on */
+ memset(skb->cb, 0, sizeof(skb->cb));
+
nla_nest_end(skb, data);
genlmsg_end(skb, hdr);
genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), skb, 0,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
