Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device
is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators.
Cc: devicet...@vger.kernel.org
Signed-off-by: Thomas Abraham <thomas...@samsung.com>
---
Documentation/devicetree/bindings/mfd/s2mps11.txt | 11 ++++++++---
1 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt
b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 0e4026a..41ee3f5 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
-* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11/14/15 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,8 +7,11 @@ interfaced to the host controller using an I2C interface. Each
sub-block is
addressed by the host system using different I2C slave addresses.
Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
- or "samsung,s2mpu02-pmic".
+- compatible: Should be one of the following
+ - "samsung,s2mps11-pmic"
+ - "samsung,s2mps14-pmic"
+ - "samsung,s2mps15-pmic"
+ - "samsung,s2mpu02-pmic"
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
@@ -82,12 +85,14 @@ as per the datasheet of s2mps11.
- valid values for n are:
- S2MPS11: 1 to 38
- S2MPS14: 1 to 25
+ - S2MPS15: 1 to 27
- S2MPU02: 1 to 28
- Example: LDO1, LDO2, LDO28
- BUCKn
- valid values for n are:
- S2MPS11: 1 to 10
- S2MPS14: 1 to 5
+ - S2MPS15: 1 to 10
- S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9
--
1.6.6.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
