On 14.10.2014 10:14, Thomas Abraham wrote: > Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device > is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators. > > Cc: devicet...@vger.kernel.org > Signed-off-by: Thomas Abraham <thomas...@samsung.com> > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 11 ++++++++--- > 1 files changed, 8 insertions(+), 3 deletions(-)
Looks good. Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com> P.S. Wrong devicetree-disc...@lists.ozlabs.org list? I receive bounces. Best regards, Krzysztof > > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt > b/Documentation/devicetree/bindings/mfd/s2mps11.txt > index 0e4026a..41ee3f5 100644 > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt > @@ -1,5 +1,5 @@ > > -* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator > +* Samsung S2MPS11/14/15 and S2MPU02 Voltage and Current Regulator > > The Samsung S2MPS11 is a multi-function device which includes voltage and > current regulators, RTC, charger controller and other sub-blocks. It is > @@ -7,8 +7,11 @@ interfaced to the host controller using an I2C interface. > Each sub-block is > addressed by the host system using different I2C slave addresses. > > Required properties: > -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic" > - or "samsung,s2mpu02-pmic". > +- compatible: Should be one of the following > + - "samsung,s2mps11-pmic" > + - "samsung,s2mps14-pmic" > + - "samsung,s2mps15-pmic" > + - "samsung,s2mpu02-pmic" > - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. > > Optional properties: > @@ -82,12 +85,14 @@ as per the datasheet of s2mps11. > - valid values for n are: > - S2MPS11: 1 to 38 > - S2MPS14: 1 to 25 > + - S2MPS15: 1 to 27 > - S2MPU02: 1 to 28 > - Example: LDO1, LDO2, LDO28 > - BUCKn > - valid values for n are: > - S2MPS11: 1 to 10 > - S2MPS14: 1 to 5 > + - S2MPS15: 1 to 10 > - S2MPU02: 1 to 7 > - Example: BUCK1, BUCK2, BUCK9 > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
