On Wed, Oct 15, 2014 at 01:55:07PM -0500, at...@opensource.altera.com wrote:
> From: Alan Tull <at...@opensource.altera.com>
> 
> Add device tree bindings documentation for ltc2978.
> 
> Signed-off-by: Alan Tull <at...@opensource.altera.com>
> Cc: Guenter Roeck <li...@roeck-us.net>
> Cc: Mark Rutland <mark.rutl...@arm.com>
> Cc: Mark Brown <broo...@kernel.org>
> ---
> v2: clean whitespace
> 
> v3: list compatible strings in single column
>     add vendor as lltc
>     mention regulators.txt instead of documenting regulator-name
>     s/vout_en/vout/
>     remove size_cells, address-cells
>     use node name to identify regulators
> ---
>  .../devicetree/bindings/hwmon/ltc2978.txt          |   39 
> ++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt 
> b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> new file mode 100644
> index 0000000..16c1227
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
> @@ -0,0 +1,39 @@
> +ltc2978
> +
> +Required properties:
> +- compatible: should contain one of:
> +  * "lltc,ltc2974"
> +  * "lltc,ltc2977"
> +  * "lltc,ltc2978"
> +  * "lltc,ltc3880"
> +  * "lltc,ltc3883"
> +  * "lltc,ltm4676"
> +- reg: I2C slave address
> +
> +Optional properties:
> +- regulators: A node that houses a sub-node for each regulator controlled by
> +  the device. Each sub-node is identified using the node's name, with valid
> +  values listed below. The content of each sub-node is defined by the
> +  standard binding for regulators; see regulator.txt.
> +
> +Valid names of regulators depend on number of supplies supported per device:
> +  * ltc2974 : vout0 - vout3
> +  * ltc2977 : vout0 - vout7
> +  * ltc2978 : vout0 - vout7
> +  * ltc3880 : vout0 - vout1
> +  * ltc3883 : vout0
> +  * ltm4676 : vout0 - vout1
> +
> +Example:
> +ltc2978@5e {
> +     compatible = "ltc2978";

Nitpick, but still:

                "lltc,ltc2978"

> +     reg = <0x5e>;
> +     regulators {
> +             vout0 {
> +                     regulator-name = "FPGA-2.5V";
> +             };
> +             vout2 {
> +                     regulator-name = "FPGA-1.5V";
> +             };
> +     };
> +};
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to