On piÄ…, 2014-10-10 at 11:56 +0100, Lee Jones wrote:
> On Fri, 10 Oct 2014, Krzysztof Kozlowski wrote:
> 
> > All interrupts coming from MUIC were ignored because interrupt source
> > register was masked.
> > 
> > The Maxim 77693 has a "interrupt source" - a separate register and 
> > interrupts
> > which give information about PMIC block triggering the individual
> > interrupt (charger, topsys, MUIC, flash LED).
> > 
> > By default bootloader could initialize this register to "mask all"
> > value. In such case (observed on Trats2 board) MUIC interrupts won't be
> > generated regardless of their mask status. Regmap irq chip was unmasking
> > individual MUIC interrupts but the source was masked
> > 
> > Before introducing regmap irq chip this interrupt source was unmasked,
> > read and acked. Reading and acking is not necessary but unmasking is.
> > 
> > Signed-off-by: Krzysztof Kozlowski <[email protected]>
> > Cc: <[email protected]>
> > Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
> 
> Applied to -fixes until someone complains.

Hi Lee,

I cannot find this patch on gitweb (MFD tree), have you applied it?

If not then could you squash it with:
mfd: max77693: Fix a truncate warning
https://lkml.org/lkml/2014/10/14/161

If you wish I could resend it.

Best regards,
Krzysztof

> 
> > ---
> > 
> > Changes since v1:
> > 1. Do the unmasking in main MFD driver. Additionally unmask all
> >    interrupts, not only MUIC. Suggested by Chanwoo Choi.
> > ---
> >  drivers/mfd/max77693.c               | 12 ++++++++++++
> >  include/linux/mfd/max77693-private.h |  7 +++++++
> >  2 files changed, 19 insertions(+)
> > 
> > diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
> > index 4b54da1ff7ab..4e4e6a1a6301 100644
> > --- a/drivers/mfd/max77693.c
> > +++ b/drivers/mfd/max77693.c
> > @@ -253,6 +253,17 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
> >             goto err_irq_muic;
> >     }
> >  
> > +   /* Unmask interrupts from all blocks in interrupt source register */
> > +   ret = regmap_update_bits(max77693->regmap,
> > +                           MAX77693_PMIC_REG_INTSRC_MASK,
> > +                           SRC_IRQ_ALL, ~SRC_IRQ_ALL);
> > +   if (ret < 0) {
> > +           dev_err(max77693->dev,
> > +                   "Could not unmask interrupts in INTSRC: %d\n",
> > +                   ret);
> > +           goto err_intsrc;
> > +   }
> > +
> >     pm_runtime_set_active(max77693->dev);
> >  
> >     ret = mfd_add_devices(max77693->dev, -1, max77693_devs,
> > @@ -264,6 +275,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
> >  
> >  err_mfd:
> >     mfd_remove_devices(max77693->dev);
> > +err_intsrc:
> >     regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
> >  err_irq_muic:
> >     regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
> > diff --git a/include/linux/mfd/max77693-private.h 
> > b/include/linux/mfd/max77693-private.h
> > index e1b2b61285b9..15fed5365a20 100644
> > --- a/include/linux/mfd/max77693-private.h
> > +++ b/include/linux/mfd/max77693-private.h
> > @@ -438,6 +438,13 @@ enum max77693_irq_source {
> >     MAX77693_IRQ_GROUP_NR,
> >  };
> >  
> > +#define SRC_IRQ_CHARGER                    BIT(0)
> > +#define SRC_IRQ_TOP                        BIT(1)
> > +#define SRC_IRQ_FLASH                      BIT(2)
> > +#define SRC_IRQ_MUIC                       BIT(3)
> > +#define SRC_IRQ_ALL                        (SRC_IRQ_CHARGER | SRC_IRQ_TOP \
> > +                                           | SRC_IRQ_FLASH | SRC_IRQ_MUIC)
> > +
> >  #define LED_IRQ_FLED2_OPEN         BIT(0)
> >  #define LED_IRQ_FLED2_SHORT                BIT(1)
> >  #define LED_IRQ_FLED1_OPEN         BIT(2)
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to