Krzysztof Kozlowski wrote:
>
Hi,
> Add SDHCI node for supporting the micro SD card. On Trats2 board the
> SDHCI does not use sd2_cd pins (gpk2-2) for card detect but gpx3-4
> instead.
>
> Power is supplied from LDO21 regulator which in off state is controlled
> by external GPIO pin.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
>
> ---
>
> Changes since v1:
> 1. Drop FIXME comment (about findings during testing).
> ---
> arch/arm/boot/dts/exynos4412-trats2.dts | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts
> b/arch/arm/boot/dts/exynos4412-trats2.dts
> index a5aa52bba72c..7a68e0832cd6 100644
> --- a/arch/arm/boot/dts/exynos4412-trats2.dts
> +++ b/arch/arm/boot/dts/exynos4412-trats2.dts
> @@ -603,6 +603,16 @@
> cap-mmc-highspeed;
> };
>
> + sdhci@12530000 {
> + bus-width = <4>;
> + cd-gpios = <&gpx3 4 0>;
> + cd-inverted;
> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
> + pinctrl-names = "default";
> + vmmc-supply = <&ldo21_reg>;
> + status = "okay";
> + };
> +
> serial@13800000 {
> status = "okay";
> };
> --
> 1.9.1
Looks good to me, will apply.
Thanks,
Kukjin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
