On Tue, Nov 04, 2014 at 11:23:06AM +0100, Stam, Michel [FINT] wrote: > Hello Riku, > > >Fixing a bug (ethtool support) must not cause breakage elsewhere (in > this case on arndale). This is now a regression of functionality from > 3.17. > > > >I think it would better to revert the change now and with less hurry > introduce a ethtool fix that doesn't break arndale. > > I don't fully agree here; > I would like to point out that this commit is a revert itself. Fixing > the armdale will then cause breakage in other implementations, such as > ours. Blankly reverting breaks other peoples' implementations. > > The PHY reset is the thing that breaks ethtool support, so any fix that > appeases all would have to take existing PHY state into account. > > I'm not an expert on the ASIX driver, nor the MII, but I think this is > the cause; > drivers/net/usb/asix_devices.c: > 361 asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, > BMCR_RESET); > 362 asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, > 363 ADVERTISE_ALL | ADVERTISE_CSMA); > 364 mii_nway_restart(&dev->mii); > > I would think that the ADVERTISE_ALL is the cause here, as it will reset > the MII back to default, thus overriding ethtool settings. > Would an: > Int reg; > reg = asix_mdio_read(dev->net,dev->mii.phy_id,MII_ADVERTISE); > > prior to the offending lines, and then; > > 362 asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, > 363 reg); > > solve the problem for you guys?
If I revert the patch in question and add this in: --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -299,6 +299,7 @@ static int ax88772_reset(struct usbnet *dev) { struct asix_data *data = (struct asix_data *)&dev->data; int ret, embd_phy; + int reg; u16 rx_ctl; ret = asix_write_gpio(dev, @@ -359,8 +360,10 @@ static int ax88772_reset(struct usbnet *dev) msleep(150); asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_CSMA); + reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_ADVERTISE); + if (!reg) + reg = ADVERTISE_ALL | ADVERTISE_CSMA; + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, reg); mii_nway_restart(&dev->mii); ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT); Then things work on Arndale for me. Does that work for you? Whether that is a sensible fix I don't know however. > > Mind, maybe the read function should take into account the reset value > of the MII, and set it to ADVERTISE_ALL | ADVERTISE_CSMA. I don't have > any documention here at the moment. Yeah I also have no documentation. Thanks, Charles > > Is anyone able to confirm my suspicions? > > Kind regards, > > Michel Stam > -----Original Message----- > From: Riku Voipio [mailto:riku.voi...@iki.fi] > Sent: Tuesday, November 04, 2014 10:44 AM > To: Stam, Michel [FINT] > Cc: Riku Voipio; da...@davemloft.net; linux-...@vger.kernel.org; > net...@vger.kernel.org; linux-kernel@vger.kernel.org; > linux-samsung-...@vger.kernel.org; ckee...@opensource.wolfsonmicro.com > Subject: Re: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net > on arndale platform > > On Tue, Nov 04, 2014 at 09:19:26AM +0100, Stam, Michel [FINT] wrote: > > Interesting, as the commit itself is a revert from a kernel back to > > 2.6 somewhere. The problem I had is related to the PHY being reset on > > interface-up, can you confirm that you require this? > > I can't confirm what exactly is needed on arndale. I'm neither expert in > USB or ethernet. However, I can confirm that without the PHY reset, > networking doesn't work on arndale. > > I now see someone else has the same problem, adding Charles to CC. > > http://www.spinics.net/lists/linux-usb/msg116656.html > > > Reverting this > > breaks ethtool support in turn. > > Fixing a bug (ethtool support) must not cause breakage elsewhere (in > this case on arndale). This is now a regression of functionality from > 3.17. > > I think it would better to revert the change now and with less hurry > introduce a ethtool fix that doesn't break arndale. > > > Kind regards, > > > > Michel Stam > > > > -----Original Message----- > > From: Riku Voipio [mailto:riku.voi...@iki.fi] > > Sent: Tuesday, November 04, 2014 8:23 AM > > To: da...@davemloft.net; Stam, Michel [FINT] > > Cc: linux-...@vger.kernel.org; net...@vger.kernel.org; > > linux-kernel@vger.kernel.org; linux-samsung-...@vger.kernel.org > > Subject: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net on > > > arndale platform > > > > Hi, > > > > With 3.18-rc3, asix on arndale (samsung exynos 5250 based board), > > fails to work. Interface is initialized but network traffic seem not > > to pass through. With kernel IP config the result looks like: > > > > [ 3.323275] usb 3-3.2.4: new high-speed USB device number 4 using > > exynos-ehci > > [ 3.419151] usb 3-3.2.4: New USB device found, idVendor=0b95, > > idProduct=772a > > [ 3.424735] usb 3-3.2.4: New USB device strings: Mfr=1, Product=2, > > SerialNumber=3 > > [ 3.432196] usb 3-3.2.4: Product: AX88772 > > [ 3.436279] usb 3-3.2.4: Manufacturer: ASIX Elec. Corp. > > [ 3.441486] usb 3-3.2.4: SerialNumber: 000001 > > [ 3.447530] asix 3-3.2.4:1.0 (unnamed net_device) (uninitialized): > > invalid hw address, using random > > [ 3.764352] asix 3-3.2.4:1.0 eth0: register 'asix' at > > usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, > de:a2:66:bf:ca:4f > > [ 4.488773] asix 3-3.2.4:1.0 eth0: link down > > [ 5.690025] asix 3-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex, > lpa > > 0xC5E1 > > [ 5.712947] Sending DHCP requests ...... timed out! > > [ 83.165303] IP-Config: Retrying forever (NFS root)... > > [ 83.170397] asix 3-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex, > lpa > > 0xC5E1 > > [ 83.192944] Sending DHCP requests ..... > > > > Similar results also with dhclient. Git bisect identified the breaking > > > commit as: > > > > commit 3cc81d85ee01e5a0b7ea2f4190e2ed1165f53c31 > > Author: Michel Stam <m.s...@fugro.nl> > > Date: Thu Oct 2 10:22:02 2014 +0200 > > > > asix: Don't reset PHY on if_up for ASIX 88772 > > > > Taking 3.18-rc3 and that commit reverted, network works again: > > > > [ 3.303500] usb 3-3.2.4: new high-speed USB device number 4 using > > exynos-ehci > > [ 3.399375] usb 3-3.2.4: New USB device found, idVendor=0b95, > > idProduct=772a > > [ 3.404963] usb 3-3.2.4: New USB device strings: Mfr=1, Product=2, > > SerialNumber=3 > > [ 3.412424] usb 3-3.2.4: Product: AX88772 > > [ 3.416508] usb 3-3.2.4: Manufacturer: ASIX Elec. Corp. > > [ 3.421715] usb 3-3.2.4: SerialNumber: 000001 > > [ 3.427755] asix 3-3.2.4:1.0 (unnamed net_device) (uninitialized): > > invalid hw address, using random > > [ 3.744837] asix 3-3.2.4:1.0 eth0: register 'asix' at > > usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, > 12:59:f1:a8:43:90 > > [ 7.098998] asix 3-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex, > lpa > > 0xC5E1 > > [ 7.118258] Sending DHCP requests ., OK > > [ 9.753259] IP-Config: Got DHCP answer from 192.168.1.1, my address > > is 192.168.1.111 > > > > There might something wrong on the samsung platform code (I understand > > > the USB on arndale is "funny"), but this is still an regression from > > 3.17. > > > > Riku -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/