Add sensorhub bindings for sensorhub on Galaxy Gear 2.
Change-Id: I4ee25aef33c21a4662de230841de9a8684f2c26b
Signed-off-by: Karol Wrona <[email protected]>
Acked-by: Kyungmin Park <[email protected]>
---
.../devicetree/bindings/iio/sensorhub.txt | 46 ++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/sensorhub.txt
diff --git a/Documentation/devicetree/bindings/iio/sensorhub.txt
b/Documentation/devicetree/bindings/iio/sensorhub.txt
new file mode 100644
index 0000000..2aca0c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/sensorhub.txt
@@ -0,0 +1,46 @@
+Samsung Sensorhub driver
+
+Sensorhub is a MCU which manages several sensors and also plays the role
+of a virtual sensor device.
+
+Required properties:
+- compatible: "samsung,sensorhub-rinato" or "samsung,sensorhub-thermostat"
+- spi-max-frequency: max SPI clock frequency
+- interrupt-parent: interrupt parent
+- interrupts: communication interrupt
+- ap-mcu-gpio: [out] ap to sensorhub line - used during communication
+- mcu-ap-gpio: [in] sensorhub to ap - used during communication
+- mcu-reset: [out] sensorhub reset
+
+Optional properties:
+- sensor's nodes:
+ compatible = "samsung,mpu6500-accel"
+ compatible = "samsung,mpu6500-gyro"
+ compatible = "samsung,adpd142"
+
+Sensor compatibles are used to match proper sensor driver to real sensor on
+the board. The firmware does not give such information, so it helps to specify
+some sensors properties. Sensors have "samsung" prefixes because frequently
+they will not have much in common with sensors used without sensorhub because
+it can do some data processing.
+
+Example:
+
+ shub_spi: shub {
+ compatible = "samsung,sensorhub-rinato";
+ spi-max-frequency = <5000000>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <2 0>;
+ ap-mcu-gpio = <&gpx0 0 0>;
+ mcu-ap-gpio = <&gpx0 4 0>;
+ mcu-reset = <&gpx0 5 0>;
+ sensor@0 {
+ compatible = "samsung,mpu6500-accel";
+ };
+ sensor@1 {
+ compatible = "samsung,mpu6500-gyro";
+ };
+ sensor@2 {
+ compatible = "samsung,adpd142";
+ };
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
