On Mon, Dec 8, 2014 at 6:38 PM, Chang Rebecca Swee Fun <rebecca.swee.fun.ch...@intel.com> wrote: > Hi all, > > This is a revised version for enabling Quark X1000 support in gpio-sch. > This version of patch series had changed according to the feedback provided > by Alexandre and Linus. > > Change log for V5: > Patch 1: > - Change variable curr_dirs to reg_val in order to make driver code easier to > understand. > > Patch 3: > - Dropped patch 3 for now. We need to re-design the driver's IRQ > implementation. > > The patches need to be patched on top of Mika Westerberg's commit at: > gpio: sch: Consolidate core and resume banks > http://marc.info/?l=linux-kernel&m=141392647225885&w=2 > > The patches has been verifed and tested working on Galileo Board. GPIO sysfs > was able to export gpio pins and changing pin direction. GPIO values were > able to controlled. One of the GPIO pins which is connected to on-board LED > was used to test GPIO functionality. We are able to turn the LED on/off by > changing the pin direction and pin value.
I think these patches are good to go, if Linus is ok with it. Nice job making this driver simpler and more legible. Looking forward to seeing the IRQ implementation! -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/