Hi Pavel, there's some problems with swsusp in 2.6.12-rc3 (x86_64): 1. Is it necessary to print the following message during regular boot? swsusp: Suspend partition has wrong signature? It is a bit annoying and I believe it will confuse some swsusp users.
2. PCMCIA related hangs during swsusp. swsusp hangs after freeing memory when either cardmgr is running or pcmcia cards are *physically* inserted. It is insufficient to do a 'cardctl eject' the cards must be removed, too, for swsusp not to hang. I do suspect some problem with the 'pccardd' kernel threads. 3. Sometimes during the search for the suspend hang reason the system went during suspend into a lightshow of: eth0: Too much work at interrupt! and some line that ends in: release_console_sem+0x13d/0x1c0) The start of the line is not readable as it just flickers by in the eth0 message limbo. NIC is a built in RTL-8169 Gigabit Ethernet (rev 10). Oh, no chance for a serial console capture as there's no built in serial device in this laptop. -- Andreas Steinmetz SPAMmers use [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/