> -----Original Message-----
> From: Hiroshi Shimamoto [mailto:h-shimam...@ct.jp.nec.com]
> Sent: Tuesday, January 20, 2015 5:07 PM
> To: Skidmore, Donald C; Bjørn Mork
> Cc: e1000-de...@lists.sourceforge.net; net...@vger.kernel.org; Choi, Sy
> Jong; linux-kernel@vger.kernel.org; Hayato Momma
> Subject: RE: [E1000-devel] [PATCH 1/2] if_link: Add VF multicast promiscuous
> mode control
>
> > Subject: RE: [E1000-devel] [PATCH 1/2] if_link: Add VF multicast
> > promiscuous mode control
> >
> >
> >
> > > -----Original Message-----
> > > From: Hiroshi Shimamoto [mailto:h-shimam...@ct.jp.nec.com]
> > > Sent: Tuesday, January 20, 2015 3:40 PM
> > > To: Bjørn Mork
> > > Cc: e1000-de...@lists.sourceforge.net; net...@vger.kernel.org; Choi,
> > > Sy Jong; linux-kernel@vger.kernel.org; Hayato Momma
> > > Subject: Re: [E1000-devel] [PATCH 1/2] if_link: Add VF multicast
> > > promiscuous mode control
> > >
> > > > Subject: Re: [PATCH 1/2] if_link: Add VF multicast promiscuous
> > > > mode control
> > > >
> > > > Hiroshi Shimamoto <h-shimam...@ct.jp.nec.com> writes:
> > > >
> > > > > From: Hiroshi Shimamoto <h-shimam...@ct.jp.nec.com>
> > > > >
> > > > > Add netlink directives and ndo entry to control VF multicast
> > > > > promiscuous
> > > mode.
> > > > >
> > > > > Intel ixgbe and ixgbevf driver can handle only 30 multicast MAC
> > > > > addresses per VF. It means that we cannot assign over 30 IPv6
> > > > > addresses to a single VF interface on VM. We want thousands IPv6
> > > addresses in VM.
> > > > >
> > > > > There is capability of multicast promiscuous mode in Intel 82599 chip.
> > > > > It enables all multicast packets are delivered to the target VF.
> > > > >
> > > > > This patch prepares to control that VF multicast promiscuous
> > > functionality.
> > > >
> > > > Adding a new hook for this seems over-complicated to me. And it
> > > > still doesn't solve the real problems that
> > > > a) the user has to know about this limit, and
> > > > b) manually configure the feature
> > > >
> > > > Most of us, lacking the ability to imagine such arbitrary hardware
> > > > limitations, will go through a few hours of frustrating debugging
> > > > before we figure this one out...
> > > >
> > > > Why can't the ixgbevf driver just automatically signal the ixgbe
> > > > driver to enable multicast promiscuous mode whenever the list
> > > > grows past the limit?
> > >
> > > I had submitted a patch to change ixgbe and ixgbevf driver for this issue.
> > > https://lkml.org/lkml/2014/11/27/269
> > >
> > > The previous patch introduces API between ixgbe and ixgbevf driver
> > > to enable multicast promiscuous mode, and ixgbevf enables it
> > > automatically if the number of addresses is over than 30.
> >
> > I believe the issue is with allowing a VF to automatically enter
> > Promiscuous Multicast without the PF's ok is concern
>
> So you mean that we should take care about enabling VF multicast
> promiscuous mode in host side, right? The host allows multicast promiscuous
> and VF requests it too, then enables VF multicast promiscuous mode.
> So, what is preferred way to do in host do you think?
I think we are saying the same thing. I believe it would be fine if the VF
requests this to happen (threw a mailbox message like you set up) and the PF
will do it if the systems policy has been set up that way (as you did with the
control mode).
This way the behavior (related to multicast) is the same as it has been, unless
the system has been setup specifically to allow VF multicast promiscuous mode.
I know it's been mentioned that this is onerous on those who want this behavior
to be automatic, but I don't see how else it could be done and take account for
people that are concerned about allowing a (possibly untrusted) VM promoting
itself in to multicast promiscuous mode.
>
> > over VM isolation. Of course that isolation, when it comes to multicast,
> > is
> rather limited anyway given that our multicast
> > filter uses only 12-bit of the address for a match. Still this (or
> > doing it by default) would only open that up considerably more (all
> > multicasts). I assume for your application you're not concerned, but are
> there other use cases that would worry about such things?
>
> Sorry I couldn't catch the point.
>
> What is the issue? I think there is no difference for the users who don't want
> many multicast addresses in guest. In the current implementation,
> overflowed multicast addresses silently discarded in ixgbevf. I believe there
> is no user who want to use over 30 multicast addresses now. If VF multicast
> promiscuous mode is enabled in certain VF, the behavior of other VFs is not
> changed.
>
> thanks,
> Hiroshi
>
> >
> > Thanks,
> > -Don Skidmore <donald.c.skidm...@intel.com>
> >
> > >
> > > I got some comment and I would like to clarify the point, but there
> > > was no answer.
> > > That's the reason I submitted this patch.
> > >
> > > Do you think a patch for the ixgbe/ixgbevf driver is preferred?
> > >
> > >
> > > thanks,
> > > Hiroshi
> > >
> > > >
> > > > I'd also like to note that this comment in
> > > > drivers/net/ethernet/intel/ixgbevf/vf.c
> > > > indicates that the author had some ideas about how more than 30
> > > > addresses could/should be handled:
> > > >
> > > > static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw,
> > > > struct net_device *netdev)
> > > > {
> > > > struct netdev_hw_addr *ha;
> > > > u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
> > > > u16 *vector_list = (u16 *)&msgbuf[1];
> > > > u32 cnt, i;
> > > >
> > > > /* Each entry in the list uses 1 16 bit word. We have 30
> > > > * 16 bit words available in our HW msg buffer (minus 1 for the
> > > > * msg type). That's 30 hash values if we pack 'em right. If
> > > > * there are more than 30 MC addresses to add then punt the
> > > > * extras for now and then add code to handle more than 30
> > > > later.
> > > > * It would be unusual for a server to request that many
> > > > multi-cast
> > > > * addresses except for in large enterprise network
> > > > environments.
> > > > */
> > > >
> > > >
> > > >
> > > > The last 2 lines of that comment are of course totally bogus and
> > > > pointless and should be deleted in any case... It's obvious that
> > > > 30 multicast addresses is ridiculously low for lots of normal use cases.
> > > >
> > > >
> > > > Bjørn
N�����r��y����b�X��ǧv�^�){.n�+����{����zX����ܨ}���Ơz�&j:+v�������zZ+��+zf���h���~����i���z� �w���?�����&�)ߢf��^jǫy�m��@A�a���
0��h���i
