On 23/01/15 10:51, Mark Rutland wrote:
diff --git
a/Documentation/devicetree/bindings/net/linn-ether-packet-sniffer.txt
b/Documentation/devicetree/bindings/net/linn-ether-packet-sniffer.txt
new file mode 100644
index 0000000..6b6e105
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/linn-ether-packet-sniffer.txt
@@ -0,0 +1,27 @@
+* Linn Products Ethernet Packet Sniffer
+
+Required properties:
+- compatible : must be "linn,eth-sniffer"
+- reg : physical addresses and sizes of registers. Must contain 3 entries:
+ first entry: registers memory space
+ second entry: TX command memory
+ third entry: RX command memory
Just to check: are those memories are part of the packet sniffer device,
or are carveouts from other memory?
Yes, the 3 memory areas are part of the packet sniffer module.
+- fifo-block-words : number of words in one data FIFO entry
+
+Example:
+
+sniffer@1814a000 {
+ compatible = "linn,eth-sniffer";
+ reg = <0x1814a000 0x100>, <0x1814a400 0x400>, <0x1814a800 0x400>;
+ reg-names = "regs", "tx-ram", "rx-ram";
+ interrupts = <GIC_SHARED 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eth-sniffer-irq";
+ clocks = <&system_clk>;
+ clock-names = "sys";
+ fifo-block-words = <4>;
+ };
Surely the relationship between the sniffer, MAC, and PHY should be
described, so we know which interface the sniffer is related to?
The packet sniffer sits between the MAC and the PHY and monitors TX or RX
packets, or both. Will add a description in the binding doc.
Your other suggestions too, will be incorporated in the next version of
the patch set.
Thank you,
Stathis
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/