Since f2fs support large sector size in commit 55cf9cb63f0e "f2fs: support large
sector size", block device with sector size of 512/1024/2048/4096 bytes can be
supported.
But mkfs.f2fs still use default sector size: 512 bytes as sector size, let's fix
this issue in this patch.
v2:
o remove unneeded printed message when sector size is large than 512 bytes
suggested by Kinglong.
o show correct sector size in printed message.
o use config.sectors_per_blk instead of DEFAULT_SECTORS_PER_BLOCK suggested by
Kinglong.
Signed-off-by: Chao Yu <chao2...@samsung.com>
---
lib/libf2fs.c | 10 +++-------
mkfs/f2fs_format.c | 12 ++++++------
mkfs/f2fs_format_utils.c | 2 +-
3 files changed, 10 insertions(+), 14 deletions(-)
diff --git a/lib/libf2fs.c b/lib/libf2fs.c
index 8123528..d2942f0 100644
--- a/lib/libf2fs.c
+++ b/lib/libf2fs.c
@@ -463,10 +463,6 @@ int f2fs_get_device_info(struct f2fs_configuration *c)
MSG(0, "\tError: Using the default sector size\n");
} else {
if (c->sector_size < sector_size) {
- MSG(0, "\tError: Cannot set the sector size to:"
- " %d as the device does not support"
- "\nSetting the sector size to : %d\n",
- c->sector_size, sector_size);
c->sector_size = sector_size;
c->sectors_per_blk = PAGE_SIZE / sector_size;
}
@@ -495,8 +491,8 @@ int f2fs_get_device_info(struct f2fs_configuration *c)
return -1;
}
if (wanted_total_sectors && wanted_total_sectors < c->total_sectors) {
- MSG(0, "Info: total device sectors = %"PRIu64" (in 512bytes)\n",
- c->total_sectors);
+ MSG(0, "Info: total device sectors = %"PRIu64" (in %u bytes)\n",
+ c->total_sectors, c->sector_size);
c->total_sectors = wanted_total_sectors;
}
@@ -504,7 +500,7 @@ int f2fs_get_device_info(struct f2fs_configuration *c)
MSG(0, "Info: total sectors = %"PRIu64" (in 512bytes)\n",
c->total_sectors);
if (c->total_sectors <
- (F2FS_MIN_VOLUME_SIZE / DEFAULT_SECTOR_SIZE)) {
+ (F2FS_MIN_VOLUME_SIZE / c->sector_size)) {
MSG(0, "Error: Min volume size supported is %d\n",
F2FS_MIN_VOLUME_SIZE);
return -1;
diff --git a/mkfs/f2fs_format.c b/mkfs/f2fs_format.c
index a8d2db6..2cce7c3 100644
--- a/mkfs/f2fs_format.c
+++ b/mkfs/f2fs_format.c
@@ -198,20 +198,20 @@ static int f2fs_prepare_super_block(void)
set_sb(block_count, config.total_sectors >> log_sectors_per_block);
zone_align_start_offset =
- (config.start_sector * DEFAULT_SECTOR_SIZE +
+ (config.start_sector * config.sector_size +
2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
zone_size_bytes * zone_size_bytes -
- config.start_sector * DEFAULT_SECTOR_SIZE;
+ config.start_sector * config.sector_size;
- if (config.start_sector % DEFAULT_SECTORS_PER_BLOCK) {
+ if (config.start_sector % config.sectors_per_blk) {
MSG(1, "\tWARN: Align start sector number to the page unit\n");
MSG(1, "\ti.e., start sector: %d, ofs:%d (sects/page: %d)\n",
config.start_sector,
- config.start_sector % DEFAULT_SECTORS_PER_BLOCK,
- DEFAULT_SECTORS_PER_BLOCK);
+ config.start_sector % config.sectors_per_blk,
+ config.sectors_per_blk);
}
- set_sb(segment_count, (config.total_sectors * DEFAULT_SECTOR_SIZE -
+ set_sb(segment_count, (config.total_sectors * config.sector_size -
zone_align_start_offset) / segment_size_bytes);
set_sb(segment0_blkaddr, zone_align_start_offset / blk_size_bytes);
diff --git a/mkfs/f2fs_format_utils.c b/mkfs/f2fs_format_utils.c
index 88b9953..a0f85f5 100644
--- a/mkfs/f2fs_format_utils.c
+++ b/mkfs/f2fs_format_utils.c
@@ -36,7 +36,7 @@ int f2fs_trim_device()
return 0;
range[0] = 0;
- range[1] = config.total_sectors * DEFAULT_SECTOR_SIZE;
+ range[1] = config.total_sectors * config.sector_size;
if (fstat(config.fd, &stat_buf) < 0 ) {
MSG(1, "\tError: Failed to get the device stat!!!\n");
--
2.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
