Hi Stefan, On Tue, Feb 10, 2015 at 7:24 PM, Stefan Wahren <[email protected]> wrote:
> thanks this is very helpful. I built the linux-next for my Duckbill and add > the > SSP2 section from imx28-evk.dts into imx28-duckbill.dts. > > Without my patch i get the following for HW_CLKCTRL_FRAC0: > > ./memwatch -a 0x800401B0 > > 0x800401b0: 0x5e5b5513 > > With my patch i get: > > ./memwatch -a 0x800401B0 > > 0x800401b0: 0x5e1b5513 > > So it looks like a problem in my patch. Yes, let's try to get the same value HW_CLKCTRL_FRAC0. > I orded such a flash chip, but it will take some time until i can use it with > my > hardware. Thanks for doing this. Maybe if you find out a way to fix the calculation of HW_CLKCTRL_FRAC0, then I can test it on my board. Regards, Fabio Estevam -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
