Signed-off-by: Andreas Färber <[email protected]>
---
arch/arm/boot/dts/zynq-parallella1.dtsi | 118 ++++++++++++++++++++++++++++++++
1 file changed, 118 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-parallella1.dtsi
b/arch/arm/boot/dts/zynq-parallella1.dtsi
index 7c1206f928bc..e77a4968fe17 100644
--- a/arch/arm/boot/dts/zynq-parallella1.dtsi
+++ b/arch/arm/boot/dts/zynq-parallella1.dtsi
@@ -47,6 +47,8 @@
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <ðernet_phy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem0_default>;
ethernet_phy: ethernet-phy@0 {
/* Marvell 88E1318 */
@@ -58,6 +60,11 @@
};
};
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
&i2c0 {
status = "okay";
@@ -85,10 +92,121 @@
};
};
+&pinctrl0 {
+ pinctrl_gem0_default: gem0-default {
+ mux {
+ function = "ethernet0";
+ groups = "ethernet0_0_grp";
+ };
+
+ conf {
+ groups = "ethernet0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26",
"MIO27";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20",
"MIO21";
+ bias-disable;
+ low-power-enable;
+ };
+
+ mux-mdio {
+ function = "mdio0";
+ groups = "mdio0_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_gpio0_default: gpio0-default {
+ mux {
+ function = "gpio0";
+ groups = "gpio0_7_grp";
+ };
+
+ conf {
+ groups = "gpio0_7_grp";
+ slew-rate = <0>;
+ io-standard = <3>;
+ };
+
+ conf-pull-up {
+ pins = "MIO7";
+ bias-pull-up;
+ };
+ };
+
+ pinctrl_sdhci1_default: sdhci1-default {
+ mux {
+ function = "sdio1";
+ groups = "sdio1_0_grp";
+ };
+
+ conf {
+ groups = "sdio1_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+
+ mux-cd {
+ function = "sdio1_cd";
+ groups = "gpio0_0_grp";
+ };
+
+ conf-cd {
+ groups = "gpio0_0_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <3>;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ function = "uart1";
+ groups = "uart1_0_grp";
+ };
+
+ conf {
+ groups = "uart1_0_grp";
+ slew-rate = <0>;
+ io-standard = <3>;
+ };
+
+ conf-rx {
+ pins = "MIO9";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO8";
+ bias-disable = <0>;
+ };
+ };
+};
+
&sdhci1 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci1_default>;
};
&uart1 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
};
--
2.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
