Change use of Altera TSE's MDIO access from phy 0 registers to phy 1
registers. This allows support for GMII, MII, RGMII, and SGMII
designs where the external PHY is always accesible through
Altera TSE's MDIO phy 1 registers and Altera's PCS is accessible
through MDIO phy 0 registers for SGMII applications.
Signed-off-by: Vince Bridgers <vbrid...@opensource.altera.com>
Tested-by: Kai Lin Ng <kai...@altera.com>
Tested-by: Dalon Westergreen <dwest...@gmail.com>
---
drivers/net/ethernet/altera/altera_tse_main.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c
b/drivers/net/ethernet/altera/altera_tse_main.c
index 996bdf1..a1ee261 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -105,11 +105,11 @@ static int altera_tse_mdio_read(struct mii_bus *bus, int
mii_id, int regnum)
/* set MDIO address */
csrwr32((mii_id & 0x1f), priv->mac_dev,
- tse_csroffs(mdio_phy0_addr));
+ tse_csroffs(mdio_phy1_addr));
/* get the data */
return csrrd32(priv->mac_dev,
- tse_csroffs(mdio_phy0) + regnum * 4) & 0xffff;
+ tse_csroffs(mdio_phy1) + regnum * 4) & 0xffff;
}
static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
@@ -120,10 +120,10 @@ static int altera_tse_mdio_write(struct mii_bus *bus, int
mii_id, int regnum,
/* set MDIO address */
csrwr32((mii_id & 0x1f), priv->mac_dev,
- tse_csroffs(mdio_phy0_addr));
+ tse_csroffs(mdio_phy1_addr));
/* write the data */
- csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy0) + regnum * 4);
+ csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy1) + regnum * 4);
return 0;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
