From: Wolfram Sang <wsa+rene...@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa+rene...@sang-engineering.com>
---
drivers/i2c/busses/i2c-qup.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 4dad23bdffbe90..fdcbdab808e9fc 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -412,17 +412,6 @@ static int qup_i2c_read_one(struct qup_i2c_dev *qup,
struct i2c_msg *msg)
unsigned long left;
int ret;
- /*
- * The QUP block will issue a NACK and STOP on the bus when reaching
- * the end of the read, the length of the read is specified as one byte
- * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
- */
- if (msg->len > QUP_READ_LIMIT) {
- dev_err(qup->dev, "HW not capable of reads over %d bytes\n",
- QUP_READ_LIMIT);
- return -EINVAL;
- }
-
qup->msg = msg;
qup->pos = 0;
@@ -534,6 +523,15 @@ static const struct i2c_algorithm qup_i2c_algo = {
.functionality = qup_i2c_func,
};
+/*
+ * The QUP block will issue a NACK and STOP on the bus when reaching
+ * the end of the read, the length of the read is specified as one byte
+ * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
+ */
+static struct i2c_adapter_quirks qup_i2c_quirks = {
+ .max_read_len = QUP_READ_LIMIT,
+};
+
static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
{
clk_prepare_enable(qup->clk);
@@ -670,6 +668,7 @@ static int qup_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&qup->adap, qup);
qup->adap.algo = &qup_i2c_algo;
+ qup->adap.quirks = &qup_i2c_quirks;
qup->adap.dev.parent = qup->dev;
qup->adap.dev.of_node = pdev->dev.of_node;
strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
