Add acpu driver for hisilicon SoC, acpu is application processor
subsystem. Dependent on the H/W design, the silicon may has the coupled
clock domain for all clusters, or every cluster can have the dedicated
clock domain. So this driver will support both implementations.
Signed-off-by: Leo Yan <leo....@linaro.org>
---
drivers/cpufreq/Kconfig.arm | 9 +
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/hisi-acpu-cpufreq.c | 324 ++++++++++++++++++++++++++++++++++++
3 files changed, 334 insertions(+)
create mode 100644 drivers/cpufreq/hisi-acpu-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 1b06fc4..7a61d09 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -108,6 +108,15 @@ config ARM_HIGHBANK_CPUFREQ
If in doubt, say N.
+config ARM_HISI_ACPU_CPUFREQ
+ tristate "CPUfreq driver for Hisilicon ACPU"
+ depends on ARCH_HISI
+ select PM_OPP
+ help
+ This enables the CPUfreq driver for hisilicon ACPU.
+
+ If in doubt, say N.
+
config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6 cpufreq support"
depends on ARCH_MXC
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 82a1821..6b7a3f0 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -59,6 +59,7 @@ arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) +=
exynos4x12-cpufreq.o
arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
+obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
diff --git a/drivers/cpufreq/hisi-acpu-cpufreq.c
b/drivers/cpufreq/hisi-acpu-cpufreq.c
new file mode 100644
index 0000000..d8a7c65
--- /dev/null
+++ b/drivers/cpufreq/hisi-acpu-cpufreq.c
@@ -0,0 +1,324 @@
+/*
+ * Hisilicon Platforms Using ACPU CPUFreq support
+ *
+ * Copyright (C) 2015 Linaro.
+ * Leo Yan <leo....@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu_cooling.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/topology.h>
+#include <linux/types.h>
+
+#define MAX_CLUSTERS 2
+
+static unsigned int coupled_clusters;
+
+static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS];
+static atomic_t cluster_usage[MAX_CLUSTERS] = {
+ ATOMIC_INIT(0),
+ ATOMIC_INIT(0),
+};
+
+static struct clk *clk[MAX_CLUSTERS];
+static struct mutex cluster_lock[MAX_CLUSTERS];
+static struct thermal_cooling_device *cdev;
+
+static inline int cpu_to_cluster(int cpu)
+{
+ return coupled_clusters ? 0 : topology_physical_package_id(cpu);
+}
+
+static unsigned int hisi_acpu_cpufreq_get_rate(unsigned int cpu)
+{
+ int cluster = cpu_to_cluster(cpu);
+ unsigned int freq;
+
+ mutex_lock(&cluster_lock[cluster]);
+
+ freq = clk_get_rate(clk[cluster]) / 1000;
+
+ mutex_unlock(&cluster_lock[cluster]);
+ return freq;
+}
+
+/* Set clock frequency */
+static int hisi_acpu_cpufreq_set_target(struct cpufreq_policy *policy,
+ unsigned int index)
+{
+ u32 cpu = policy->cpu, cluster;
+ unsigned int freqs_new;
+ int ret = 0;
+
+ cluster = cpu_to_cluster(cpu);
+ freqs_new = freq_table[cluster][index].frequency;
+
+ pr_debug("%s: cluster %d freq_new %d\n", __func__, cluster, freqs_new);
+
+ mutex_lock(&cluster_lock[cluster]);
+
+ ret = clk_set_rate(clk[cluster], freqs_new * 1000);
+ if (WARN_ON(ret))
+ pr_err("clk_set_rate failed: %d, cluster: %d\n", ret, cluster);
+
+ mutex_unlock(&cluster_lock[cluster]);
+ return ret;
+}
+
+static void put_cluster_clk_and_freq_table(struct device *cpu_dev)
+{
+ u32 cluster = cpu_to_cluster(cpu_dev->id);
+
+ if (atomic_dec_return(&cluster_usage[cluster]))
+ return;
+
+ if (!freq_table[cluster])
+ return;
+
+ clk_put(clk[cluster]);
+ dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
+ dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
+}
+
+static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
+{
+ struct device_node *np;
+ u32 cluster;
+ char name[6];
+ int ret;
+
+ cluster = cpu_to_cluster(cpu_dev->id);
+
+ if (atomic_inc_return(&cluster_usage[cluster]) != 1)
+ return 0;
+
+ if (freq_table[cluster])
+ return 0;
+
+ np = of_node_get(cpu_dev->of_node);
+ if (!np) {
+ dev_err(cpu_dev, "%s: failed to find cpu%d node\n",
+ __func__, cpu_dev->id);
+ ret = -ENOENT;
+ goto out;
+ }
+
+ ret = of_init_opp_table(cpu_dev);
+ if (ret) {
+ dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err:
%d\n",
+ __func__, cpu_dev->id, ret);
+ of_node_put(np);
+ goto out;
+ }
+
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]);
+ if (ret) {
+ dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d,
err: %d\n",
+ __func__, cpu_dev->id, ret);
+ goto out;
+ }
+
+ sprintf(name, "acpu%d", cluster);
+ clk[cluster] = clk_get_sys(name, NULL);
+ if (IS_ERR(clk[cluster]))
+ clk[cluster] = clk_get(cpu_dev, name);
+ if (IS_ERR(clk[cluster])) {
+ dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster:
%d\n",
+ __func__, cpu_dev->id, cluster);
+ ret = PTR_ERR(clk[cluster]);
+ dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
+ goto out;
+ } else {
+ dev_info(cpu_dev, "%s: clk: %p & freq table: %p, cluster: %d\n",
+ __func__, clk[cluster], freq_table[cluster], cluster);
+ }
+
+ return 0;
+
+out:
+ dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n",
+ __func__, cluster);
+ atomic_dec(&cluster_usage[cluster]);
+ return ret;
+}
+
+/* Per-CPU initialization */
+static int hisi_acpu_cpufreq_init(struct cpufreq_policy *policy)
+{
+ u32 cur_cluster = cpu_to_cluster(policy->cpu);
+ struct device *cpu_dev;
+ int ret;
+
+ cpu_dev = get_cpu_device(policy->cpu);
+ if (!cpu_dev) {
+ pr_err("%s: failed to get cpu%d device\n", __func__,
+ policy->cpu);
+ return -ENODEV;
+ }
+
+ ret = get_cluster_clk_and_freq_table(cpu_dev);
+ if (ret)
+ return ret;
+
+ /*
+ * If system have two clusters, usually the clock has two options:
+ * 1. two clusters share the same clock source;
+ * 2. two clusters have dedicated clock source;
+ *
+ * so add the flag coupled_clusters to indicate whether two clusters
+ * share the clock source or not. if two clusters share the clock source
+ * then directly call the generic init flow, it will bind all cpus...
+ */
+ if (coupled_clusters)
+ return cpufreq_generic_init(policy, freq_table[0],
+ 1000000); /* 1 ms, assumed */
+
+ /* bind the cpus within the cluster */
+ ret = cpufreq_table_validate_and_show(policy,
+ freq_table[cur_cluster]);
+ if (ret) {
+ dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n",
+ policy->cpu, cur_cluster);
+ put_cluster_clk_and_freq_table(cpu_dev);
+ return ret;
+ }
+
+ cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
+ policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */
+
+ dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu);
+ return 0;
+}
+
+static int hisi_acpu_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ struct device *cpu_dev;
+
+ cpu_dev = get_cpu_device(policy->cpu);
+ if (!cpu_dev) {
+ pr_err("%s: failed to get cpu%d device\n", __func__,
+ policy->cpu);
+ return -ENODEV;
+ }
+
+ put_cluster_clk_and_freq_table(cpu_dev);
+ dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu);
+ return 0;
+}
+
+static struct cpufreq_driver hisi_acpu_cpufreq_driver = {
+ .name = "hisi-acpu",
+ .flags = CPUFREQ_STICKY |
+ CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+ CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+ .verify = cpufreq_generic_frequency_table_verify,
+ .target_index = hisi_acpu_cpufreq_set_target,
+ .get = hisi_acpu_cpufreq_get_rate,
+ .init = hisi_acpu_cpufreq_init,
+ .exit = hisi_acpu_cpufreq_exit,
+ .attr = cpufreq_generic_attr,
+};
+
+static const struct of_device_id hisi_acpu_cpufreq_match[] = {
+ {
+ .compatible = "hisilicon,hisi-acpu-cpufreq",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, hisi_acpu_cpufreq_match);
+
+static int hisi_acpu_cpufreq_probe(struct platform_device *pdev)
+{
+ int ret = 0, i;
+ struct device_node *np, *cpus;
+
+ np = pdev->dev.of_node;
+ if (!np) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ of_property_read_u32(np, "hisilicon,coupled-clusters",
+ &coupled_clusters);
+ dev_dbg(&pdev->dev, "%s: coupled_clusters is %d\n",
+ __func__, coupled_clusters);
+
+ for (i = 0; i < MAX_CLUSTERS; i++)
+ mutex_init(&cluster_lock[i]);
+
+ ret = cpufreq_register_driver(&hisi_acpu_cpufreq_driver);
+ if (ret)
+ dev_err(&pdev->dev,
+ "%s: failed to register cpufreq driver\n", __func__);
+
+ cpus = of_find_node_by_path("/cpus");
+ if (!cpus) {
+ dev_err(&pdev->dev, "failed to find cpus node\n");
+ return 0;
+ }
+
+ np = of_get_next_child(cpus, NULL);
+ if (!np) {
+ dev_err(&pdev->dev, "failed to find cpus child node\n");
+ of_node_put(cpus);
+ return 0;
+ }
+
+ if (of_find_property(np, "#cooling-cells", NULL)) {
+ cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
+ if (IS_ERR(cdev)) {
+ dev_err(&pdev->dev, "running cpufreq without cooling
device: %ld\n",
+ PTR_ERR(cdev));
+ cdev = NULL;
+ }
+ }
+ of_node_put(np);
+ of_node_put(cpus);
+
+ return 0;
+
+out:
+ return ret;
+}
+
+static int hisi_acpu_cpufreq_remove(struct platform_device *pdev)
+{
+ cpufreq_cooling_unregister(cdev);
+ cpufreq_unregister_driver(&hisi_acpu_cpufreq_driver);
+ return 0;
+}
+
+static struct platform_driver hisi_acpu_cpufreq_platdrv = {
+ .driver = {
+ .name = "hisi-acpu-cpufreq",
+ .owner = THIS_MODULE,
+ .of_match_table = hisi_acpu_cpufreq_match,
+ },
+ .probe = hisi_acpu_cpufreq_probe,
+ .remove = hisi_acpu_cpufreq_remove,
+};
+module_platform_driver(hisi_acpu_cpufreq_platdrv);
+
+MODULE_AUTHOR("Leo Yan <leo....@linaro.org>");
+MODULE_DESCRIPTION("Hisilicon acpu cpufreq driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
