We're moving from a single node for multiple devices to a node with one sub-node per sub-device, registered by simple-mfd. Update the documentation to reflect the changes.
Signed-off-by: Antoine Tenart <antoine.ten...@free-electrons.com> --- .../devicetree/bindings/arm/marvell,berlin.txt | 26 +++++++++++++--------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt index a99eb9eb14c0..3a7fce4dc4af 100644 --- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -49,10 +49,13 @@ chip control registers, so there should be a single DT node only providing the different functions which are described below. Required properties: -- compatible: shall be one of - "marvell,berlin2-chip-ctrl" for BG2 - "marvell,berlin2cd-chip-ctrl" for BG2CD - "marvell,berlin2q-chip-ctrl" for BG2Q +- compatible: + * the first value should be one of: + "marvell,berlin2-chip-ctrl" for BG2 + "marvell,berlin2cd-chip-ctrl" for BG2CD + "marvell,berlin2q-chip-ctrl" for BG2Q + * the second and third values must be: + "simple-mfd", "syscon" - reg: address and length of following register sets for BG2/BG2CD: chip control register set BG2Q: chip control register set and cpu pll registers @@ -63,10 +66,13 @@ Marvell Berlin SoCs have a system control register set providing several individual registers dealing with pinmux, padmux, and reset. Required properties: -- compatible: should be one of - "marvell,berlin2-system-ctrl" for BG2 - "marvell,berlin2cd-system-ctrl" for BG2CD - "marvell,berlin2q-system-ctrl" for BG2Q +- compatible: + * the first value should be one of: + "marvell,berlin2-system-ctrl" for BG2 + "marvell,berlin2cd-system-ctrl" for BG2CD + "marvell,berlin2q-system-ctrl" for BG2Q + * the second and third values must be: + "simple-mfd", "syscon" - reg: address and length of the system control register set * Clock provider binding @@ -118,7 +124,7 @@ Required property: Example: chip: chip-control@ea0000 { - compatible = "marvell,berlin2-chip-ctrl"; + compatible = "marvell,berlin2-chip-ctrl", "simple-mfd", "syscon"; #clock-cells = <1>; #reset-cells = <2>; reg = <0xea0000 0x400>; @@ -132,7 +138,7 @@ chip: chip-control@ea0000 { }; sysctrl: system-controller@d000 { - compatible = "marvell,berlin2-system-ctrl"; + compatible = "marvell,berlin2-system-ctrl", "simple-mfd", "syscon"; reg = <0xd000 0x100>; uart0_pmux: uart0-pmux { -- 2.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/