The chip and system controller nodes are now handled by the Berlin
controller mfd driver. Its sub-devices are then registered by the mfd
driver and let the drivers be probed properly, using their own
sub-nodes.

Rework the device tree to take this changes into account.

Signed-off-by: Antoine Tenart <antoine.ten...@free-electrons.com>
---
 arch/arm/boot/dts/berlin2.dtsi | 50 ++++++++++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 19 deletions(-)

diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 63d00a63cfa6..fbe5c6b6502d 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -350,17 +350,25 @@
                        };
                };
 
-               chip: chip-control@ea0000 {
-                       compatible = "marvell,berlin2-chip-ctrl";
-                       #clock-cells = <1>;
-                       #reset-cells = <2>;
+               chip: chip-controller@ea0000 {
+                       compatible = "marvell,berlin2-chip-ctrl", "simple-mfd", 
"syscon";
                        reg = <0xea0000 0x400>;
+                       #clock-cells = <1>;
                        clocks = <&refclk>;
                        clock-names = "refclk";
 
-                       emmc_pmux: emmc-pmux {
-                               groups = "G26";
-                               function = "emmc";
+                       soc_pinctrl: pin-controller {
+                               compatible = "marvell,berlin2-soc-pinctrl";
+
+                               emmc_pmux: emmc-pmux {
+                                       groups = "G26";
+                                       function = "emmc";
+                               };
+                       };
+
+                       chip_rst: reset {
+                               compatible = "marvell,berlin2-reset";
+                               #reset-cells = <2>;
                        };
                };
 
@@ -442,22 +450,26 @@
                        };
 
                        sysctrl: system-controller@d000 {
-                               compatible = "marvell,berlin2-system-ctrl";
+                               compatible = "marvell,berlin2-system-ctrl", 
"simple-mfd", "syscon";
                                reg = <0xd000 0x100>;
 
-                               uart0_pmux: uart0-pmux {
-                                       groups = "GSM4";
-                                       function = "uart0";
-                               };
+                               sys_pinctrl: pin-controller {
+                                       compatible = 
"marvell,berlin2-system-pinctrl";
 
-                               uart1_pmux: uart1-pmux {
-                                       groups = "GSM5";
-                                       function = "uart1";
-                               };
+                                       uart0_pmux: uart0-pmux {
+                                               groups = "GSM4";
+                                               function = "uart0";
+                                       };
+
+                                       uart1_pmux: uart1-pmux {
+                                               groups = "GSM5";
+                                               function = "uart1";
+                                       };
 
-                               uart2_pmux: uart2-pmux {
-                                       groups = "GSM3";
-                                       function = "uart2";
+                                       uart2_pmux: uart2-pmux {
+                                               groups = "GSM3";
+                                               function = "uart2";
+                                       };
                                };
                        };
 
-- 
2.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to